Publications
2024
Wiegner,
J. F., Ossentjuk, I. M., Nienhuis, R. M., Vakis,
A. I., Gibescu, M., & Gazzani, M. (2024).
Harvesting the Wind - Assessment of Offshore Electricity
Storage Systems. Computer Aided Chemical
Engineering, 53, 2185-2190. https://doi.org/10.1016/B978-0-443-28824-1.50365-3
Bernal
Camacho, D., Mendoza, E., Fontes, J. V. H., Echeverria,
C., & Vakis, A. I. (2024). Improvement of
the Stability of a Floating Offshore Wind Turbine by a Centreboard
and Heave Plate System. SSRN Electronic
Journal. Advance online publication. https://doi.org/10.2139/ssrn.4720857
Kousemaker,
T. M., Druetta, P. D., Picchioni,
F., & Vakis, A. I. (2024). Modelling
Supercritical CO2 Bubble Breakup Dynamics in Twin Screw
Extruders. In Computational Fluid Dynamics (CFDTC);
Micro and Nano Fluid Dynamics (MNFDTC); Flow Visualization
Article V002T05A034 (American Society of Mechanical Engineers,
Fluids Engineering Division (Publication) FEDSM; Vol. 2). American
Society of Mechanical Engineers (ASME). https://doi.org/10.1115/FEDSM2024-132245
Kousemaker,
T. M., Druetta, P., Picchioni,
F., & Vakis, A. I. (2024). Modelling
supercritical CO2 flow in a co-rotating twin screw extruder using
the level-set method. Chemical Engineering
Research and Design, 205, 569-577. https://doi.org/10.1016/j.cherd.2024.04.022
Bechlenberg,
A., Luning, E. A., Saltık, M. B.,
Szirbik, N. B., Jayawardhana, B., &
Vakis, A. I. (2024). Renewable energy system sizing
with power generation and storage functions accounting for its
optimized activity on multiple electricity markets.
Applied Energy, 360, Article 122742.
https://doi.org/10.1016/j.apenergy.2024.122742
Asiikkis,
A. T., Grigoriadis, D. G. E., & Vakis, A.
I. (2024). Wave-to-wire modelling and hydraulic PTO
optimization of a dense point absorber WEC array.
Renewable Energy, 237, Article
121620. https://doi.org/10.1016/j.renene.2024.121620
2023
Bechlenberg,
A., Wei, Y., Jayawardhana, B., &
Vakis, A. I. (2023). Analysing the influence of power
take-off adaptability on the power extraction of dense wave energy
converter arrays. Renewable Energy,
211, 1-12. https://doi.org/10.1016/j.renene.2023.04.076
Bechlenberg,
A., Wei, Y., Jayawardhana, B., &
Vakis, A. I. (2023). Analysis of the impact of
floater interactions on the power extraction of a dense WEC array
with adaptable nonlinear PTO. Paper presented at 15th
European Wave and Tidal Energy Conference 2023, Bilbao, Spain. https://doi.org/10.36688/ewtec-2023-310
Saincher,
S., Sriram, V., Ravindar, R., Shiqiangyan, S., Stagonas, D.,
Schimmels, S., Xie, Z., Benoit, M., Benguigui, W., Teles, M.,
Robaux, F., Peyrard, C., Asiikkis, A. T., Frantzis,
C., Vakis, A. I., Grigoriadis, D. G. E., Ma, Q.,
Zhang, N., Zheng, K., ... Wan, D. (2023). Comparative Study
on Breaking Waves Interaction with Vertical Wall Retrofitted with
Recurved Parapet in Small and Large Scale.
International journal of offshore and polar
engineering, 33(2), 113-122. https://doi.org/10.17736/ijope.2023.jc890
Nienhuis,
R. M., van Rooij, M., Prins, W. A.,
Jayawardhana, B., & Vakis, A. I. (2023).
Investigating the efficiency of a novel offshore pumped hydro
energy storage system: Experimental study on a scale
prototype. Journal of Energy Storage,
74, Article 109374. https://doi.org/10.1016/j.est.2023.109374
Asiikkis,
A., Grigoriadis, D. G. E., & Vakis, A. I.
(2023). Maximizing the surge amplitude of a floater
through an adaptable mooring tightening technique.
Paper presented at 15th European Wave and Tidal Energy Conference
2023, Bilbao, Spain. https://doi.org/10.36688/ewtec-2023-274
Gao,
Q., Bechlenberg, A., Vakis, A. I.,
Ertugrul, N., Jayawardhana, B., & Ding, B. (2023).
Techno-Economic Assessment of Offshore Wind and Hybrid
Wind-Wave Farms with Energy Storage Systems. Manuscript
submitted for publication. https://doi.org/10.2139/ssrn.4358078
Wang,
C., Stamhuis, E., Veldman,
A., & Vakis, A. I. (2023). Vortex
induced vibrations of marine risers: validating turbulence models -
EWTEC 2023. Paper presented at 15th European Wave and
Tidal Energy Conference 2023, Bilbao, Spain. https://doi.org/10.36688/ewtec-2023-342
2022
Asiikkis,
A. T., Frantzis, C., Stagonas, D., Vakis, A.
I., & Grigoriadis, D. G. E. (2022). 2D LES of
breaking waves on seawalls with recurved parapets. In
Proceedings of the 32nd International Ocean and Polar
Engineering Conference, ISOPE 2022 (pp. 2726-2733).
(Proceedings of the International Offshore and Polar Engineering
Conference). ISOPE.
Schmerbauch,
A. E. M., Krushynska, A., Vakis, A.
I., & Jayawardhana, B. (2022).
Modular kirigami arrays for distributed actuation systems in
adaptive optics. Physical Review
Applied, 17, Article 044012 . https://doi.org/10.1103/PhysRevApplied.17.044012
2021
Bechlenberg,
A., Wei, Y., Jayawardhana, B., &
Vakis, A. I. (2021). Analysis of power take-off
adaptability in dense wave energy converter arrays. In
Proceedings of the ICOE 2021
Schmerbauch,
A. E. M., Vakis, A. I., &
Jayawardhana, B. (2021). Electrical coupling analysis
of 2D time-multiplexing memory actuators exhibiting asymmetric
butterfly hysteresis. Journal of Applied
Physics, 130, Article 134502. https://doi.org/10.1063/5.0062981
Kousemaker,
T. M., Jonker, G. H., & Vakis, A.
I. (2021). LCA Practices of Plastics and Their
Recycling: A Critical Review. Applied
Sciences, 11(8), Article 3305. https://doi.org/10.3390/app11083305
Wei,
Y., Bechlenberg, A., Jayawardhana,
B., & Vakis, A. I. (2021). Modelling
of a wave energy converter array with non-linear power take-off
using a mixed time-domain/frequency-domain method.
IET Renewable Power Generation,
15(14), 3220-3231. https://doi.org/10.1049/rpg2.12231
2020
Alpizar-Castillo,
J., Muhammad Zaki Almuzakki, M., Wei, Y.,
Muñoz Arias, M., Vakis, A. I., &
Jayawardhana, B. (Accepted/In press). An energy
extraction optimization port-Hamiltonian model-based algorithm for
the Ocean Grazer Wave Energy Converter. In INDETEC
2020 IEEE.
Groen,
M., Solhjoo, S., Voncken, R., Post,
J., & Vakis, A. (2020). FlexMM: A
standard method for material descriptions in FEM.
Advances in Engineering Software,
148, Article 102876. https://doi.org/10.1016/j.advengsoft.2020.102876
Schmerbauch,
A., Vasquez Beltran, M., Vakis, A.
I., Jayawardhana, B., & Huisman,
R. (2020). High Pixel Number Deformable Mirror
Concept Utilizing Piezoelectric Hysteresis for Stable Shape
Configurations. 123. Abstract from 39th Benelux Meeting
on Systems and Control, Elspeet, Netherlands.
Schmerbauch,
A. E. M., Vasquez-Beltran, M. A., Vakis,
A., Huisman, R., & Jayawardhana,
B. (2020). Influence functions for a hysteretic
deformable mirror with a high-density 2D array of actuators.
Applied Optics, 59(27), 8077-8088.
https://doi.org/10.1364/AO.397472
Schmerbauch,
A. E. M., Vakis, A. I., Huisman,
R., & Jayawardhana, B. (2020).
Modeling and analysis of a hysteretic deformable mirror with
electrically coupled actuators. In 2020 IEEE/ASME
International Conference on Advanced Intelligent Mechatronics
(AIM) (pp. 1929-1934). Article 9158999 (IEEE/ASME
International Conference on Advanced Intelligent Mechatronics, AIM;
Vol. 2020-July). IEEE. https://doi.org/10.1109/AIM43001.2020.9158999
Michele,
S., Buriani, F., Renzi, E., Rooij ,van, M., Jayawardhana,
B., & Vakis, A. I. (2020). Wave
Energy Extraction by Flexible Floaters.
Energies, 13(23), Article 6167. https://doi.org/10.3390/en13236167
2019
Solhjoo,
S., Halbertsma, P. J., Veldhuis, M., Toljaga,
R., Pei, Y., & Vakis, A. I.
(2020). Effects of loading conditions on free surface
roughening of AISI 420 martensitic stainless steel.
Journal of Materials Processing Technology,
275, Article 116311. https://doi.org/10.1016/j.jmatprotec.2019.116311
Li,
J., Sundman, B., Winkelman, J., Vakis, A.
I., & Picchioni, F. (2020).
Implementation of the UNIQUAC model in the OpenCalphad
software. Fluid Phase Equilibria,
507, Article 112398. https://doi.org/10.1016/j.fluid.2019.112398
Schmerbauch,
A. E. M., Vasquez Beltran, M., Vakis, A.
I., Jayawardhana, B., & Peletier,
R. (2019). High pixel number deformable mirror
concept utilizing piezoelectric hysteresis for stable shape
configurations. Poster session presented at ENTEG
Autumn Meeting 2019, Haren, Netherlands.
Bechlenberg,
A., Wei, Y., Szirbik, N., Jayawardhana,
B., & Vakis, A. I. (2019). Impact
of Power Take-Off Adaptability on Power Extraction of Dense Wave
Energy Converter Arrays in Irregular Waves. Poster
session presented at ENTEG Autumn Meeting 2019, Haren,
Netherlands.
Mokabber,
T., Zhou, Q., Vakis, A. I., van Rijn,
P., & Pei, Y. T. (2019). Mechanical
and biological properties of electrodeposited calcium phosphate
coatings. Materials science & engineering
c-Biomimetic and supramolecular systems, 100,
475-484. https://doi.org/10.1016/j.msec.2019.03.020
Wei,
Y., Bechlenberg, A., van Rooij, M.,
Jayawardhana, B., & Vakis, A. I. (2019).
Modelling of a wave energy converter array with a nonlinear
power take-off system in the frequency domain.
Applied Ocean Research, 90, Article
101824. https://doi.org/10.1016/j.apor.2019.05.009
Solhjoo,
S., Müser, M. H., & Vakis, A. I.
(2019). Nanocontacts and Gaussian Filters: Insights into the
idea of Filtering contact stress fields for removing the effects of
surface roughness at the atomic scale. Tribology
Letters, 67(3), Article 94. https://doi.org/10.1007/s11249-019-1209-0
Prins,
W., Rooij, van, M., Vakis, A. I., &
Jayawardhana, B. (2019). Underwater
energy storage system. (Patent No. WO2019117711).
https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=WO&NR=2019117711A1&KC=A1&FT=D&ND=3&date=20190620&DB=&locale=en_EP
2018
Wei,
Y., Barradas Berglind, J. D. J., Yu, Z., van Rooij, M.,
Prins, W., Jayawardhana, B., & Vakis,
A. I. (2019). Frequency-Domain Hydrodynamic Modelling
of Dense and Sparse Arrays of Wave Energy Converters.
Renewable Energy, 135, 775-788. https://doi.org/10.1016/j.renene.2018.12.022
Mokabber,
T., van Rijn, P., Vakis, A.
I., & Pei, Y. (2018). Adhesion of
osteoblast-like cells on electrodeposited calcium phosphate
coatings. In THERMEC'2018: Advanced Materials for
Bioengineering Applications Article 816
Wei,
Y., Barradas Berglind, J. D. J., Muhammad Zaki Almuzakki,
M., van Rooij, M., Wang, R., Jayawardhana,
B., & Vakis, A. I. (2018). A Fourier
Approximation Method for the Multi-Pump Multi-Piston Power Take-Off
System. In Proceedings of the 37th International
Conference on Ocean, Offshore and Arctic Engineering
ASME.
Muhammad
Zaki Almuzakki, M., Barradas Berglind, J. D. J., Wei,
Y., Muñoz Arias, M., Vakis, A.
I., & Jayawardhana, B. (2018). A
port-Hamiltonian Approach to Cummins’ Equation for Floater
Arrays with Linear Power Take-Off Systems. In H.
Ramírez (Ed.), 6th IFAC Workshop on Lagrangian and
Hamiltonian Methods for Nonlinear Control (LHMNC 2018) (pp.
155-160). (IFAC-PapersOnLine; Vol. 51, No. 3). IFAC-PapersOnLine.
https://doi.org/10.1016/j.ifacol.2018.06.043
Mokabber,
T., Lu, L., van Rijn, P.,
Vakis, A. I., & Pei, Y. T. (2018).
Crystal growth mechanism of calcium phosphate coatings on
titanium by electrochemical deposition. Surface
& Coatings Technology, 334, 526-535. https://doi.org/10.1016/j.surfcoat.2017.12.011
Tay,
Z. Y., Wei, Y., & Vakis, A. I. (2018).
Energy Extraction of Pontoon-Type Wave Energy
Converter. In Proceedings of the 37th International
Conference on Ocean, Offshore and Arctic Engineering
ASME.
Muhammad
Zaki Almuzakki, M., Barradas Berglind, J. D. J., Wei,
Y., Muñoz Arias, M., Vakis, A.
I., & Jayawardhana, B. (2018).
Extending Cummins’ equation to floater arrays: A
port-Hamiltonian approach. 91-91. Abstract from 37th
Benelux meeting on Systems and Control, Soesterberg,
Netherlands.
Wang,
R., Wei, Y., van Rooij, M., Jayawardhana, B.,
& Vakis, A. I. (2018). Influence of a Taut Cable
on the Performance of a Point-Absorber Wave Energy
Converter. In Proceedings of the 37th International
Conference on Ocean, Offshore and Arctic Engineering: Ocean
Renewable Energy (Vol. 10). Article OMAE2018-77490 ASME. https://doi.org/10.1115/OMAE2018-77490
Vakis,
A. I., Yastrebov, V. A., Scheibert, J., Nicola, L., Dini,
D., Minfray, C., Almqvist, A., Paggi, M., Lee, S., Limbert, G.,
Molinari, J. F., Anciaux, G., Echeverri Restrepo, S., Papangelo,
A., Cammarata, A., Nicolini, P., Aghababaei, R., Putignano, C.,
Stupkiewicz, S., ... Ciavarella, M. (2018). Modeling and
Simulation in Tribology Across Scales: an Overview.
Tribology International, 125,
169-199. https://doi.org/10.1016/j.triboint.2018.02.005
Toljaga,
R., Vakis, A. I., Hazrati, J., & van den
Boogaard, A. H. (2018). Multiscale bonding strength in
direct-joined polymer-metal interfaces. Poster session
presented at ENTEG Autumn Meeting 2018, Haren, Netherlands.
Li,
J., Orozco Gutierrez, F., Bose, R.,
Vakis, A. I., & Picchioni, F. (2018).
On the effect of crosslinking density over the
self-healing kinetics of Diels-Alder-based thermoset polymers:
Differential scanning calorimetry study. Poster session
presented at ENTEG Autumn Meeting 2018, Haren, Netherlands.
Barradas
Berglind, J. D. J., Dijkstra, H. T., Wei, Y., van Rooij, M.,
Meijer, H., Prins, W., Vakis, A.
I., & Jayawardhana, B. (2018).
Revenue maximisation and storage utilisation for the Ocean
Grazer wave energy converter: A sensitivity analysis.
IET Renewable Power Generation,
12(11), 1241-1248. https://doi.org/10.1049/iet-rpg.2018.5107
Muhammad
Zaki Almuzakki, M., Vakis, A. I., &
Jayawardhana, B. (2018). Two oscillating bodies
Wave Energy Converter with hydraulic-type Power Take-Off unit:
Modeling and simulation. Poster session presented at
ENTEG Autumn Meeting 2018, Haren, Netherlands.
2017
Wei,
Y., Yu, Z., Barradas Berglind, J. D. J., van Rooij, M.,
Prins, W., Jayawardhana, B., & Vakis,
A. I. (2017). A Frequency-Domain Model for a Novel
Wave Energy Converter. In European Wave and Tidal Energy
Conference Series (EWTEC)
Solhjoo,
S., & Vakis, A. I. (2017). Atomic
scale roughness of gold substrates. Poster session
presented at Lorentz Workshop Micro/Nanoscale Models for Tribology,
Leiden, Netherlands.
Solhjoo,
S., & Vakis, A. I. (2017).
Continuum contact mechanics theories at the atomic scale:
an investigation of non-adhesive contacts. Poster
session presented at Lorentz Workshop Micro/Nanoscale Models for
Tribology, Leiden, Netherlands.
Barradas-Berglind,
J. J., Muñoz Arias, M., Wei, Y., Prins,
W., Vakis, A. I., & Jayawardhana,
B. (2017). Energy-based Modeling of the Ocean
Grazer Power Take-off System. 121. Abstract from 36th
Benelux Meeting on Systems and Control, Spa, Belgium.
Brenes
Casasola, J., Muñoz Arias, M., Barradas-Berglind,
J. J., Prins, W. A., Vakis, A. I.,
& Jayawardhana, B. (2017). Energy Extraction
Analysis of the Ocean Grazer WEC via Digital Particle Image
Velocimetry. 72. Abstract from 36th Benelux Meeting on
Systems and Control, Spa, Belgium.
Song,
H., Vakis, A. I., Liu, X., & van der
Giessen, E. (2017). From Discrete Dislocation
Plasticity to a Statistical Model of Rough Surface
Contact. Abstract from 2017 MRS Fall Meeting &
Exhibit, Boston, United States.
Wei,
Y., Barradas Berglind, J. J., van Rooij, M., Prins,
WA., Jayawardhana, B., & Vakis, A.
I. (2017). Investigating the adaptability of the
multi-pump multi-piston power take-off system for a novel wave
energy converter. Renewable Energy,
111, 598-610. https://doi.org/10.1016/j.renene.2017.04.042
Müser,
M. H., Dapp, W. B., Bugnicourt, R., Sainsot, P., Lesaffre, N.,
Lubrecht, T. A., Persson, B. N. J., Harris, K., Bennett, A.,
Schulze, K., Rohde, S., Ifju, P., Sawyer, W. G., Angelini, T.,
Ashtari Esfahani, H., Kadkhodaei, M., Akbarzadeh, S., Wu, J.-J.,
Vorlaufer, G., ... Greenwood, J. A. (2017). Meeting the
Contact-Mechanics Challenge. Tribology
Letters, 65(4), Article 118. https://doi.org/10.1007/s11249-017-0900-2
Song,
H., Vakis, A. I., Liu, X., & Van der
Giessen, E. (2017). Statistical model of rough surface
contact accounting for size-dependent plasticity and asperity
interaction. Journal of the Mechanics and Physics
of Solids, 106, 1-14. https://doi.org/10.1016/j.jmps.2017.05.014
Solhjoo,
S., & Vakis, A. I. (2017). Surface
roughness of gold substrates at the nanoscale: An atomistic
simulation study. Tribology
International, 115, 165-178. https://doi.org/10.1016/j.triboint.2017.05.024
Mokabber,
T., van Rijn, P., Vakis, A.
I., & Pei, Y. T. (2017). The
interaction of bone-like cells with electrodeposited calcium
phosphate coatings. Poster session presented at 26th
Annual Meeting Netherlands Society for Biomaterials and Tissue
Engineering, Lunteren, Netherlands.
Barradas-Berglind,
J. J., Muñoz Arias, M., Wei, Y., Prins, W.
A., Vakis, A. I., & Jayawardhana,
B. (2017). Towards Ocean Grazer's Modular Power
Take-Off System Modeling: A Port-Hamiltonian Approach. In D.
Dochain, D. Henrion, & D. Peaucelle (Eds.), 20th World
Congress of the International Federation of Automatic Control
(pp. 15663-15669). (IFAC- PapersOnLine; Vol. 50, No. 1). IFAC. https://doi.org/10.1016/j.ifacol.2017.08.2397
2016
Solhjoo,
S., Vakis, A. I., & Pei, Y. T.
(2017). Two phenomenological models to predict the single
peak flow stress curves up to the peak during hot
deformation. Mechanics of Materials,
105, 61-66. https://doi.org/10.1016/j.mechmat.2016.12.001
Mokabber,
T., van Rijn, P., Vakis, A.
I., & Pei, Y. T. (2016). Adhesion
of cells on synthesized hydroxyapatite coatings with different
morphologies. Abstract from Netherlands Society for
Biomaterials and Tissue Engineering (NBTE) 25th Annual Meeting,
Lunteren, Netherlands.
Solhjoo,
S., & Vakis, A. I. (2016). Continuum
mechanics at the atomic scale: Insights into non-adhesive contacts
using molecular dynamics simulations. Journal of
Applied Physics, 120(21), 215102-1-215102-16.
Article 215102. https://doi.org/10.1063/1.4967795
Barradas
Berglind, J. D. J., Meijer, H., van Rooij, M., Clemente Pinol, S.,
Galvan Garcia, B., Prins, W., Vakis, A.
I., & Jayawardhana, B. (2016). Energy
Capture Optimization for an Adaptive Wave Energy Converter.
In Proceedings of the 2nd International Conference on Renewable
Energies Offshore - RENEW 2016 (pp. 171-178). CRC Press,
Taylor and Francis Group. http://www.centec.tecnico.ulisboa.pt/renew2016/general_info.aspx
Song,
H., van der Giessen, E., & Vakis, A.
I. (2016). Erratum: "Asperity Interaction and
Substrate Deformation in Statistical Summation Models of Contact
Between Rough Surfaces" [Journal of Applied Mechanics, 81(4), p.
041012]. Journal of Applied Mechanics-Transactions
of the Asme, 83(8), 087001. https://doi.org/10.1115/1.4033534
Vakis,
A. I., & Anagnostopoulos, J. S. (2016). Mechanical
design and modeling of a single-piston pump for the novel power
take-off system of a wave energy converter.
Renewable Energy, 96(Part A),
531-547. https://doi.org/10.1016/j.renene.2016.04.076
Dijkstra,
H. T., Barradas Berglind, J. J., Meijer, H., van Rooij, M.,
Prins, W. A., Vakis, A. I., &
Jayawardhana, B. (2016). Revenue Optimization for the
Ocean Grazer Wave Energy Converter through Storage
Utilization. In Proc. of 2nd International Conference on
Renewable Energies Offshore - RENEW 2016 (pp. 207-213). CRC
Press, Taylor and Francis Group.
Solhjoo,
S., & Vakis, A. I. (2016). The
Area of Contact for Non-Adhesive Rough Surfaces: Comparison between
MD and Persson’s Model. Abstract from 8th
International Conference on Multiscale Materials Modeling, Dijon,
France. http://mmm2016.iop.org/IOP/media/uploaded/EVIOP/event_817/MMM_2016_Abstracts.pdf
2015
Solhjoo,
S., & Vakis, A. I. (2015). Definition
and detection of contact in atomistic simulations.
Computational Materials Science,
109, 172-182. https://doi.org/10.1016/j.commatsci.2015.07.026
van
Rooij, M., Meijer, H., Prins, W., & Vakis,
A. I. (2015). Experimental performance evaluation
and validation of dynamical models of the Ocean Grazer.
Paper presented at OCEANS'15 MTS/IEEE Genova, Genova, Italy.
Solhjoo,
S., & Vakis, A. I. (2015).
Lubricated Normal and Sliding Contact of Fractal Rough
Surfaces at the Atomic Scale. 46. Abstract from
COSTnanoTribo, Istanbul, Turkey.
Solhjoo,
S., & Vakis, A. I. (2015). Normal
Contacts of Lubricated Fractal Rough Surfaces at the Atomic
Scale. 34. Abstract from TriboUK 2015, Loughborough,
United Kingdom. http://www.tribouk2015.com/uploads/2/9/1/7/29171159/tribouk2015-booklet-web1.pdf#page=34
Chowdhury,
S., Vakis, A. I., & Polycarpou, A. A. (2015).
Optimization of molecularly thin lubricant to improve bearing
capacity at the head-disk interface: Microsystem
Technologies. Microsystem
Technologies, 21(7), 1501-1511. https://doi.org/10.1007/s00542-014-2364-8
Solhjoo,
S., & Vakis, A. I. (2015). Single
asperity nanocontacts: Comparison between molecular dynamics
simulations and continuum mechanics models.
Computational Materials Science, 99,
209-220. https://doi.org/10.1016/j.commatsci.2014.12.010
2014
Vakis,
A. I. (2014). Asperity Interaction and Substrate
Deformation in Statistical Summation Models of Contact Between
Rough Surfaces. Journal of Applied
Mechanics-Transactions of the Asme, 81(4),
Article 041012. https://doi.org/10.1115/1.4025413
Solhjoo,
S., & Vakis, A. I. (2014). Dry
sliding contact between fractal and statistical rough surfaces at
the atomic scale. Poster session presented at European
Symposium on Friction, Wear and Wear Protection, Karlsruhe,
Germany.
Vakis,
A. I., Meijer, H., & Prins, W. A. (2014).
First Steps in the Design and Construction of the Ocean
Grazer. In Engineering Systems Design and Analysis
(Vol. 2 Dynamics, pp. V002T09A004). ASME/AIAA. https://doi.org/10.1115/ESDA2014-20108
Solhjoo,
S., & Vakis, A. I. (2014). Molecular
Dynamics Simulations of Rough Contact With Fractal and Statistical
Surface Generation. In Engineering Systems Design and
Analysis Article ESDA2014-20107, V003T14A002 ASME. https://doi.org/10.1115/ESDA2014-20107
2013
Vakis,
A. I., & Polycarpou, A. A. (2013). An Advanced
Rough Surface Continuum-Based Contact and Sliding Model in the
Presence of Molecularly Thin Lubricant. Tribology
Letters, 49(1), 227-238. https://doi.org/10.1007/s11249-012-0060-3
2012
Vakis,
A. I., & Polycarpou, A. A. (2012). Dynamic
Adhesive Contact with Molecularly Thin Lubricant at the Head-Disk
Interface of Hard Disk Drives. Tribology &
Lubrication Technology, 68(3), 16-18.
Vakis,
A. I., & Polycarpou, A. A. (2012). Modeling
Sliding Contact of Rough Surfaces with Molecularly Thin
Lubricants. Tribology Letters,
45(1), 37-48. https://doi.org/10.1007/s11249-011-9863-x
Vakis,
A. I., & Polycarpou, A. A. (2012). Passive
Vibration Absorption for Extremely High Density Recording.
IEEE Transactions on Magnetics,
48(11), 4261-4264. https://doi.org/10.1109/TMAG.2012.2195479
Vakis,
A. I., Hadjicostis, C. N., & Polycarpou, A. A. (2012).
Three-DOF dynamic model with lubricant contact for thermal
fly-height control nanotechnology. Journal of
Physics D-Applied Physics, 45(13), Article
135402. https://doi.org/10.1088/0022-3727/45/13/135402
2011
Vakis,
A. I., Eriten, M., & Polycarpou, A. A. (2011).
Modeling Bearing and Shear Forces in Molecularly Thin
Lubricants. Tribology Letters,
41(3), 573-586. https://doi.org/10.1007/s11249-010-9736-8
2010
Vakis,
A. I., & Polycarpou, A. A. (2010). Head-disk
interface nanotribology for Tbit/inch(2) recording densities:
Near-contact and contact recording. Journal of
Physics D-Applied Physics, 43(22), Article
225301. https://doi.org/10.1088/0022-3727/43/22/225301
Vakis,
A. I., Eriten, M., & Polycarpou, A. A. (2010).
Molecularly thin lubricant layer contact model accounting
for interfacial slip. Paper presented at ASME/STLE
International Joint Tribology Conference, San Francisco, United
States. https://doi.org/10.1115/IJTC2010-41249
Vakis,
A. I., & Polycarpou, A. A. (2010). Nanoscale
mechanics for extremely high density recording. Paper
presented at HSTAM International Congress on Mechanics, Limassol,
Cyprus.
Vakis,
A. I., & Polycarpou, A. A. (2010). Optimization of
thermal fly-height control slider geometry for Tbit/in^2
recording. Microsystem Technologies,
16(6), 1021-1034. https://doi.org/10.1007/s00542-010-1081-1
2009
Vakis,
A. I., Lee, S.-C., & Polycarpou, A. A. (2009).
Dynamic contact with friction of an ultra-low flying
head-disk interface with thermal protrusion. In
Proceedings of the Asia-Pacific Magnetic Recording Conference,
2009 (pp. AA-2-1-AA-2-2). University of Groningen, Research
Institute of Technology and Management.
Vakis,
A. I., Lee, S.-C., & Polycarpou, A. A. (2009).
Dynamic Head-Disk Interface Instabilities With Friction for
Light Contact (Surfing) Recording. IEEE
Transactions on Magnetics, 45(11), 4966-4971.
https://doi.org/10.1109/TMAG.2009.2029410
2008
Spagna,
J. C., Vakis, A. I., Schmidt, C. A., Patek, S. N.,
Zhang, X., Tsutsui, N. D., & Suarez, A. V. (2008).
Phylogeny, scaling, and the generation of extreme forces in
trap-jaw ants. The Journal of Experimental
Biology, 211(14), 2358-2368. https://doi.org/10.1242/jeb.015263
2007
Zhang,
X., Li, K., & Vakis, A. I. (2007).
Biological Inspiration from Dynamic Modeling of Human Hand
and Trap-Jaw Ant Mandible Movements. In Program and
Abstracts of the XXI Congress, International Society of
Biomechanics (Vol. 40, pp. S79-S79). University of Groningen,
Research Institute of Technology and Management.
2006
Spagna,
JC., Patek, SN., Vakis, AI., & Suarez, AV. (2006).
Extreme forces and jaw size variation in trap-jaw
ants. In Integrative and Comparative Biology (Vol.
46, pp. E134-E134)
| Last modified: | 24 June 2024 6.31 p.m. |