Publications
2024
Zhang,
W., Kooi, B. J., & Pei, Y.
(2024). Additively manufactured high entropy alloys:
microstructure and properties, current challenges, and future
work. In G. Yasin, M. A. Khan, M. A. Afifi, T. A. Nguyen,
& Y. Zhang (Eds.), High-Entropy Alloys: Design,
Manufacturing, and Emerging Applications (pp. 485-561).
Elsevier. https://doi.org/10.1016/B978-0-443-22142-2.00027-2
Yu,
Q., Zhang, W., Shang, J., Liu, B., Pei,
Y., Li, Y., & Ao, S. (2024). Comparative
investigation on the microstructure and corrosion properties of
surfacing cobalt alloys by various methods.
Surface and Coatings Technology,
494(Part 1), Article 131386. https://doi.org/10.1016/j.surfcoat.2024.131386
Li,
W., Lu, L., Zhang, C., Loos,
K., & Pei, Y. (2024). Durable and
High-Performance Triboelectric Nanogenerator Based on an Inorganic
Triboelectric Pair of Diamond-Like-Carbon and Glass.
Advanced science, 11(33), Article
2309170. https://doi.org/10.1002/advs.202309170
Liu,
Z., Zhang, W., Gao, P., Xing, Y., Wu, L., Pei,
Y., Li, Y., & Ao, S. (2024). Effects of post-weld
heat treatment on microstructure, tensile properties and linear
expansion behavior of laser welded Invar alloy.
Materials Science and Engineering: A,
914, Article 147169. https://doi.org/10.1016/j.msea.2024.147169
Shen,
J., Zhang, W., Lopes, J. G., Pei, Y.,
Zeng, Z., Maawad, E., Schell, N., Baptista, A. C., Mishra, R. S.,
& Oliveira, J. P. (2024). Evolution of microstructure and
deformation mechanisms in a metastable
Fe42Mn28Co10Cr15Si5
high entropy alloy: A combined in-situ synchrotron X-ray
diffraction and EBSD analysis. Materials and
Design, 238, Article 112662. https://doi.org/10.1016/j.matdes.2024.112662
Xiang,
Y., Lu, L., Zhang, Y.,
Ersek, G., Portale, G., Li,
W., Zhang, W., Kottapalli, A. G.
P., & Pei, Y. (2024). Insights into
the aspect ratio effects of ordered mesoporous carbon on the
electrochemical performance of sulfur cathode in lithium-sulfur
batteries. Journal of Colloid and Interface
Science, 665, 286-298. https://doi.org/10.1016/j.jcis.2024.03.128
Wang,
Z., Li, W., Klingner, A., Pei,
Y., Misra, S., & Khalil, I. S. M. (2024).
Magnetic control of soft microrobots near step-out frequency:
Characterization and analysis. Computational and
Structural Biotechnology Journal, 25, 165-176.
https://doi.org/10.1016/j.csbj.2024.08.022
Lu,
L., Zhang, W., Yan, F.,
Xiang, Y., Rudolf, P., & Pei,
Y. (2025). Mesoporous graphenoid nanosheets for
high-rate and lean-electrolyte lithium-sulfur batteries.
Journal of Power Sources, 625,
Article 235689. Advance online publication. https://doi.org/10.1016/j.jpowsour.2024.235689
Yan,
F., Moretón Alfonsín, E., Ngene, P., de
Graaf, S., De Luca, O., Cao, H., Spyrou,
K., Lu, L., Thomou, E., Pei,
Y., Kooi, B. J., Gournis, D. P., de Jongh, P.
E., & Rudolf, P. (2024). MgH2
nanoparticles confined in reduced graphene oxide pillared with
organosilica: a novel type of hydrogen storage material.
Nanoscale, 16(33), 15770-15781. https://doi.org/10.1039/d4nr01524j
He,
X., Xiang, Y., Yao, W., Yan,
F., Zhang, Y., Gerlach, D.,
Pei, Y. T., Rudolf, P., & Portale,
G. (2024). MXene surface engineering enabling
high-performance solid-state lithium metal batteries.
Advanced Functional Materials, Article
2416040. Advance online publication. https://doi.org/10.1002/adfm.202416040
Chabok,
A., Zhang, W., Shen, J., Oliveira, J. P.,
Wang, H., Feng, S., Schell, N., Kooi, B.
J., & Pei, Y. (2024). On the
orientation-dependent mechanical properties of interstitial
solute-strengthened
Fe49.5Mn30Co10Cr10C0.5
high entropy alloy produced by directed energy deposition.
Additive Manufacturing, 79, Article
103914. https://doi.org/10.1016/j.addma.2023.103914
Xiang,
Y., Yan, F., Zhao, Z., Li, J., Li, W.,
Zhang, W., Lu, L., & Pei, Y.
(2024). Synergistic restriction of polysulfides enabled by
cobalt@carbon spheres embedded CNTs: A facile approach for
constructing sulfur cathodes with high sulfur content.
Journal of Colloid and Interface Science,
674, 959-971. https://doi.org/10.1016/j.jcis.2024.06.230
Xiang,
Y., Lu, L., Yan, F.,
Sengupta, D., Rudolf, P., Kottapalli, A.
G. P., & Pei, Y. (2024). Tuning the
crystallinity of titanium nitride on copper-embedded carbon
nanofiber interlayers for accelerated electrochemical kinetics in
lithium–sulfur batteries. Carbon
Energy, 6(6), Article e450. https://doi.org/10.1002/cey2.450
Jia,
X., Jansma, R., Zhang, W., & Pei,
Y. (2024). Ultrashort pulsed laser ablation of
stainless steel with MHz bursts. In R. Kling, W. Pfleging,
& K. Sugioka (Eds.), Laser-based Micro- and Nanoprocessing
XVIII Article 128730R (Progress in Biomedical Optics and
Imaging - Proceedings of SPIE; Vol. 12873). SPIE. https://doi.org/10.1117/12.3022837
Zhang,
W., Chabok, A., Wang, H., Shen,
J., Oliveira, J. P., Feng, S., Schell, N., Kooi, B.
J., & Pei, Y. (2024). Ultra-strong
and ductile precipitation-strengthened high entropy alloy with 0.5
% Nb addition produced by laser additive manufacturing.
Journal of Materials Science and Technology,
187, 195-211. https://doi.org/10.1016/j.jmst.2023.11.053
2023
Gao,
P., Liu, D., Pei, Y., & Feng, S. (2024).
Optimal Reynolds number of cooling water in conformal cooling
molds. Applied Thermal Engineering,
236(Part A), 1. Article 121509. https://doi.org/10.1016/j.applthermaleng.2023.121509
Zhang,
W., Wang, H., Kooi, B.,
& Pei, Y. (2023). Additive manufacturing of
interstitial-strengthened high entropy alloy: Scanning strategy
dependent anisotropic mechanical properties.
Materials science and engineering a-Structural materials
properties microstructure and processing, 872,
Article 144978. https://doi.org/10.1016/j.msea.2023.144978
Heidarzadeh,
A., Mohammadzadeh, R., Ahmed, M., & Pei, Y. T.
(2023). Correlation between local mechanical properties and
corresponding microstructures in a friction stir processed Monel
alloy. Journal of Materials Research and
Technology, 24, 5139-5146. https://doi.org/10.1016/j.jmrt.2023.04.123
Meng,
L. X., Yang, H. J., Wang, S. G., Ji, H. B., Shao, X. H.,
Zhang, Z. J., Ren, D. C., Zhang, X., Yang, J. B., An, X.
H., Pei, Y. T., De Hosson, J. T. M.,
Yang, R., & Zhang, Z. J. (2023).
Defect-healing of a laser-powder bed fusion Ti6Al4V alloy via
electro-assisted micro-forging. Materials
Characterization, 205, Article 113298. https://doi.org/10.1016/j.matchar.2023.113298
Zhang,
W., Shen, J., Oliveira, J. P., Wang, H., Feng,
S., Schell, N., Kooi, B. J., & Pei,
Y. (2023). Deformation processes of additively
manufactured interstitial-strengthened high entropy alloy: In-situ
high-energy synchrotron X-ray diffraction and microstructural
appraisal. Additive Manufacturing,
76, Article 103791. https://doi.org/10.1016/j.addma.2023.103791
Li,
W., Yan, F., Xiang, Y., Zhang,
W., Loos, K., & Pei, Y.
(2023). Enhanced triboelectric nanogenerators based on 2D
smectite clay nanosheets with a strong intrinsic negative surface
charge. Nano energy, 112,
Article 108487. https://doi.org/10.1016/j.nanoen.2023.108487
Sengupta,
D., Lu, E., Ribas Gomes, D.,
Jayawardhana, B., Pei, Y., &
Kottapalli, A. G. P. (2023). Fabric-like electrospun
PVAc-graphene nanofiber webs as wearable and degradable
piezocapacitive sensors. ACS Applied Materials
& Interfaces, 15, 22351–22366. https://doi.org/10.1021/acsami.3c03113
Ye,
C., Li, W., Voet, V. S. D.,
Folkersma, R., Pei, Y., & Loos, K.
(2023). Flexible Vitrimers for Self-healable Triboelectric
Nanogenerators. Advanced Materials
Technologies, 8(8), Article 2201670. https://doi.org/10.1002/admt.202201670
Li,
W., Lu, L., Yan, F.,
Palasantzas, G., Loos, K., & Pei,
Y. (2023). High-performance triboelectric
nanogenerators based on TPU/mica nanofiber with enhanced
tribo-positivity. Nano energy,
114, Article 108629. https://doi.org/10.1016/j.nanoen.2023.108629
Wu,
Y., Liu, J., Jiang, H., Deng, Q. Y., Wen, F., Pei, Y.,
& Cao, H. (2023). Improvement of the mechanical and
tribological behaviors by Ti-C interlayer for diamond-like carbon
films on nitrile butadiene rubber. Materials
science and engineering b-Advanced functional solid-State
materials, 290, Article 116289. https://doi.org/10.1016/j.mseb.2023.116289
Li,
S., Dong, X., Chabok, A., Pei, Y., Zhang,
X., Chen, Y., De Hosson, J. T. M., & Cao, H.
(2023). In-situ micromechanical analysis of a high-vanadium
high-speed steel coating made with additive manufacturing.
Materials science and engineering a-Structural materials
properties microstructure and processing, 870,
Article 144850. https://doi.org/10.1016/j.msea.2023.144850
Chen,
Q., Li, W., Yan, F., Maniar,
D., van Dijken, J., Rudolf,
P., Pei, Y., & Loos, K.
(2023). Lightweight Triboelectric Nanogenerators Based on
Hollow Stellate Cellulose Films Derived from Juncus effusus L.
Aerenchyma. Advanced Functional
Materials, 33(50), Article 2304801. https://doi.org/10.1002/adfm.202304801
Xiang,
Y., Lu, L., Li, W., Yan,
F., Wang, H., Zhao, Z., Li, J., Giri
Prakash Kottapalli, A., & Pei, Y. (2023).
Nitrogen-doped porous carbon nanofibers embedded with
Cu/Cu3P heterostructures as multifunctional current
collectors for stabilizing lithium anodes in lithium-sulfur
batteries. Chemical Engineering
Journal, 472, Article 145089. https://doi.org/10.1016/j.cej.2023.145089
Li,
W., Xiang, Y., Zhang, W.,
Loos, K., & Pei, Y. (2023). Ordered
mesoporous SiO2 nanoparticles as charge storage sites
for enhanced triboelectric nanogenerators. Nano
energy, 113, Article 108539. https://doi.org/10.1016/j.nanoen.2023.108539
2022
Zhang,
W., Shen, J., Oliveira, J. P., Kooi, B.,
& Pei, Y. T. (2023). Crystallographic
orientation-dependent deformation characteristics of additive
manufactured interstitial-strengthened high entropy alloys.
Scripta Materialia, 222, Article
115049. https://doi.org/10.1016/j.scriptamat.2022.115049
Lan,
X., Li, W., Ye, C., Boetje,
L., Pelras, T., Silvianti,
F., Chen, Q., Pei, Y., &
Loos, K. (2023). Scalable and Degradable Dextrin-Based
Elastomers for Wearable Touch Sensing. ACS Applied
Materials and Interfaces, 15(3),
4398–4407. https://doi.org/10.1021/acsami.2c15634
Zhang,
W., Chabok, A., Kooi, B. J.,
& Pei, Y. (2022). Additive manufactured high
entropy alloys: A review of the microstructure and
properties. Materials and Design,
220, Article 110875. https://doi.org/10.1016/j.matdes.2022.110875
Zhang,
W., Kooi, B., & Pei, Y. T.
(2022). Additive Manufacturing of Interstitial High
Entropy Alloy: Scanning Strategy Dependent Anisotropic Mechanical
Properties. Poster session presented at 2nd Global
Summit on 3D Printing & Additive Manufacturing, Copenhagen,
Denmark.
Li,
W., Lu, E., Kottapalli, A. G.
P., & Pei, Y. T. (2022). Bioinspired
sweat-resistant wearable triboelectric nanogenerator for movement
monitoring during exercise. Nano
energy, 95, Article 107018. https://doi.org/10.1016/j.nanoen.2022.107018
Orozco,
F., Salvatore, A., Sakulmankongsuk, A., Gomes, D.
R., Pei, Y., Araya-Hermosilla, E., Pucci, A.,
Moreno-Villoslada, I., Picchioni, F., &
Bose, R. K. (2022). Electroactive performance and cost
evaluation of carbon nanotubes and carbon black as conductive
fillers in self-healing shape memory polymers and other
composites. Polymer, 260,
Article 125365. https://doi.org/10.1016/j.polymer.2022.125365
Li,
W., Lu, E., Liu, G., Zhang, C., Loos,
K., & Pei, Y. T. (2022).
Honeybee-inspired electrostatic microparticle manipulation
system based on triboelectric nanogenerator. Nano
energy, 104(Part B), Article 107901. https://doi.org/10.1016/j.nanoen.2022.107901
Li,
W., Lu, E., Fu, X., Zhang, C., Loos,
K., & Pei, Y. T. (2022).
Kármán Vortex Street Driven Membrane
Triboelectric Nanogenerator for Enhanced Ultra-Low Speed Wind
Energy Harvesting and Active Gas Flow Sensing. ACS
Applied Materials & Interfaces, 14(45),
51018−51028. https://doi.org/10.1021/acsami.2c16350
Hemmatpour,
H., Haddadi-Asl, V., Khanipour, F., Stuart, M. C.
A., Lu, L., Pei, Y.,
Roghani-Mamaqani, H., & Rudolf, P. (2022).
Mussel-inspired grafting pH-responsive brushes onto
halloysite nanotubes for controlled release of doxorubicin.
European Polymer Journal, 180,
Article 111583. https://doi.org/10.1016/j.eurpolymj.2022.111583
Chabok,
A., Cao, H., van der Aa, E., & Pei, Y.
(2022). New insights into the fracture behavior of advanced
high strength steel resistance spot welds. Journal
of Materials Processing Technology, 301,
Article 117433. https://doi.org/10.1016/j.jmatprotec.2021.117433
Ahmadi,
M., Salgın, B., Kooi, B. J., &
Pei, Y. (2022). Outstanding cracking resistance in
Mg-alloyed zinc coatings achieved via crystallographic texture
control. Scripta Materialia,
210, Article 114453. https://doi.org/10.1016/j.scriptamat.2021.114453
Xiang,
Y., Lu, L., Kottapalli, A. G.
P., & Pei, Y. T. (2022). Particle
size effects of ordered mesoporous carbon on the electrochemical
performance of sulfur cathode in lithium-sulfur
battery.
Xiang,
Y., Lu, E., Kottapalli, A. G.
P., & Pei, Y. T. (2022). Status and
perspectives of hierarchical porous carbon materials in terms of
high-performance lithium–sulfur batteries.
Carbon Energy, 4(3), 346-398. https://doi.org/10.1002/cey2.185
Ahmadi,
M., Salgın, B., Kooi, B. J., &
Pei, Y. (2022). The effect of grain refinement on the
deformation and cracking resistance in Zn–Al–Mg
coatings. Materials Science and Engineering
A, 840, Article 142995. https://doi.org/10.1016/j.msea.2022.142995
2021
Sengupta,
D., Lu, E., Pei, Y. T.,
& Kottapalli, A. G. P. (2022). Fabric-Like
Pvac-Graphene Nanofiber Capacitive Pressure Sensors For
Next-Generation Wearables. In 2022 IEEE 35th
International Conference on Micro Electro Mechanical Systems
Conference (MEMS) (pp. 341-344). IEEE. https://doi.org/10.1109/MEMS51670.2022.9699712
Li,
W., Pei, Y., Zhang, C., & Kottapalli,
A. G. P. (2021). Bioinspired Designs and Biomimetic
Applications of Triboelectric Nanogenerators. Nano
energy, 84, Article 105865. https://doi.org/10.1016/j.nanoen.2021.105865
Pei,
Y. T., & Ahmadi, M. (2021). Characterization method of formability properties of
zinc alloy coating on a metal substrate. (Patent No.
WO2021038102).
Cao,
H., Wen, F., Kumar, S., Rudolf, P.,
De Hosson, J. T. M., & Pei, Y. (2021).
Corrigendum to “On the S/W stoichiometry and
triboperformance of WSxC(H) coatings deposited by
magnetron sputtering” [Surface and Coatings Technology 365
(2019) 41-51]. Surface and Coatings
Technology, 423, Article 127595. https://doi.org/10.1016/j.surfcoat.2021.127595
Ahmadi,
M., Salgın, B., Kooi, B. J., &
Pei, Y. (2021). Cracking behavior and formability of
Zn-Al-Mg coatings: Understanding the influence of steel
substrates. Materials & design,
212, Article 110215. https://doi.org/10.1016/j.matdes.2021.110215
Feng,
S., Kamat, A. M., & Pei, Y. (2021).
Design and fabrication of conformal cooling channels in
molds: Review and progress updates. International
Journal of Heat and Mass Transfer, 171,
Article 121082. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121082
Orozco
Gutierrez, F., Kaveh, M., Santosa, D., de
Macedo Rooweder Lima, G., Ribas Gomes,
D., Pei, Y. T., Araya Hermosilla, R.,
Moreno-Villoslada, I., Picchioni, F., &
Bose, R. (2021). Electroactive Self-Healing Shape
Memory Polymer Composites Based on Diels–Alder
Chemistry. ACS Applied Polymer
Materials, 3(12), 6147-6156. https://doi.org/10.1021/acsapm.1c00999
Feng,
S., Kamat, A. M., Sabooni, S.,
& Pei, Y. T. (2021). Experimental and numerical
investigation of the origin of surface roughness in laser powder
bed fused overhang regions. Virtual and Physical
Prototyping, 16(sup. 1), S66-S84. https://doi.org/10.1080/17452759.2021.1896970
Kamat,
A. M., Kottapalli, A. G. P., & Pei,
Y. (2021). Fabrication of polymeric
microstructures. (Patent No. WO2021094623A1).
Lu,
L., & Pei, Y. T. (2021). Interfacial
modification by lithiophilic oxide facilitating uniform and thin
solid electrolyte interphase towards stable lithium metal
anodes. Materials Today Energy,
21, Article 100748. https://doi.org/10.1016/j.mtener.2021.100748
Sabooni,
S., Chabok, A., Feng, S. C., Blaauw,
H., Pijper, T. C., Yang, H. J., & Pei, Y.
T. (2021). Laser powder bed fusion of 17–4 PH
stainless steel: A comparative study on the effect of heat
treatment on the microstructure evolution and mechanical
properties. Additive Manufacturing,
46, Article 102176. https://doi.org/10.1016/j.addma.2021.102176
Sabooni,
S., Blaauw, H., Pijper, T., & Pei, Y.
(2021). Mechanical-corrosion properties of 17-4 PH
stainless steel manufactured using laser powder bed fusion: The
influence of post-process heat treatments. 1. Paper
presented at European steel technology and application days,
Stockholm, Sweden.
Ahmadi,
M., Salgın, B., Kooi, B., & Pei,
Y. T. (2021). Mechanical properties and cracking
behaviour of hot dip galvanized ZnAlMg coatings.. Manuscript
submitted for publication In 12th International Conference on
Zinc & Zinc Alloy Coated Steel Sheet - GALVATECH 2021
Article 48
Lu,
L., Xiang, Y., & Pei, Y. T.
(2021). Nanostructured graphene for high-energy-density
lithium-sulfur batteries. Abstract from 2DMAT2021,
Paris, France.
Cao,
H., Bai, M., Inkson, B. J., Zhong, X., De Hosson, J. T.
M., Pei, Y., & Xiao, P. (2021).
Self-healing WS2 tribofilms: An in-situ appraisal
of mechanisms. Scripta Materialia,
204, Article 114124. https://doi.org/10.1016/j.scriptamat.2021.114124
Cao,
H., Momand, J., Syari'Ati, A., Wen,
F., Rudolf, P., Xiao, P., De Hosson, J. T.
M., & Pei, Y. (2021).
Temperature-Adaptive Ultralubricity of a WS2/a-C
Nanocomposite Coating: Performance from Room Temperature up to 500
°c. ACS Applied Materials and
Interfaces, 13(24), 28843-28854. https://doi.org/10.1021/acsami.1c06061
Wu,
Z., Zhang, C., Liu, J., Wen, F., Cao, H., & Pei,
Y. (2021). The investigation of microstructure,
photocatalysis and corrosion resistance of c-doped ti–o films
fabricated by reactive magnetron sputtering deposition with
co2 gas. Coatings,
11(8), Article 881. https://doi.org/10.3390/coatings11080881
Lu,
L., Xiang, Y., & Pei, Y. T.
(2021). Three-dimensional Nanoporous Graphene for High-
Energy-Density Lithium-Sulfur Batteries. Abstract from
NANOMEET2021, Porto, Portugal.
Ahmadi,
M., Salgın, B., Ahmadi, M., Kooi,
B., & Pei, Y. T. (2021). Unraveling
dislocation mediated plasticity and strengthening in
crack-resistant ZnAlMg coatings. International
Journal of Plasticity, 144, Article 103041. https://doi.org/10.1016/j.ijplas.2021.103041
Li,
W., Sengupta, D., Pei, Y.,
& Kottapalli, A. G. P. (2021). Wearable
nanofiber-based triboelectric nanogenerator for body motion energy
harvesting. In 2021 IEEE International Conference on
Flexible and Printable Sensors and Systems (FLEPS) (pp. 1-4).
Article 9469844 IEEE. https://doi.org/10.1109/FLEPS51544.2021.9469844
2020
Kamat,
A. M., Pei, Y. T., Jayawardhana,
B., & Kottapalli, A. G. P. (2021).
Biomimetic Soft Polymer Microstructures and Piezoresistive
Graphene MEMS Sensors using Sacrificial Metal 3D Printing.
ACS Applied Materials & Interfaces,
13(1), 1094-1104. https://doi.org/10.1021/acsami.0c21295
Mokabber,
T., Cao, H. T., Norouzi, N., van Rijn,
P., & Pei, Y. T. (2020).
Antimicrobial Electrodeposited Silver-Containing Calcium
Phosphate Coatings. ACS Applied Materials &
Interfaces, 12(5), 5531-5541. https://doi.org/10.1021/acsami.9b20158
Chabok,
A., van der Aa, E., & Pei, Y. (2020).
A study on the effect of chemical composition on the
microstructural characteristics and mechanical performance of
DP1000 resistance spot welds. Materials science
and engineering a-Structural materials properties microstructure
and processing, 788, Article 139501. https://doi.org/10.1016/j.msea.2020.139501
Yang,
L., Ge, L., Zhou, Q., Mokabber,
T., Bron, R., Pei, Y., &
van Rijn, P. (2020). Biomimetic Multiscale
Hierarchical Topography Enhances Osteogenic Differentiation of
Human Mesenchymal Stem Cells. Advanced Materials
Interfaces, 7(14), Article 2000385. https://doi.org/10.1002/admi.202000385
Xi,
X.-Y., Sun, Z.-H., Cao, H.-T., Pei, Y.,
ten Brink, G. H., Deuss, P. J., Barta,
K., & Heeres, H. J. (2020). Catalyst
Performance Studies on the Guerbet Reaction in a Continuous Flow
Reactor Using Mono- and Bi-Metallic Cu-Ni Porous Metal
Oxides. Catalysts, 10(9),
1-16. Article 996. https://doi.org/10.3390/catal10090996
Lu,
L., & Pei, Y. (2020). Composite structure and method for producing the
composite structure. (Patent No.
WO2020136187).
Lu,
L., Pei, F., Abeln, T., & Pei, Y. (2020).
Corrigendum: “Tailoring three-dimensional
interconnected nanoporous graphene micro/nano-foams for
lithium-sulfur batteries”.
Carbon, 161, 342-342. https://doi.org/10.1016/j.carbon.2020.01.071
Zuo,
X., Deng, Q., Yang, T., Liu, J., Cao, H., Jiang, H., Wen, F.,
& Pei, Y. (2020). Effect of titanium suboxide on
the formation of anatase and rutile phases during annealing of
C-Doped Ti-O thin film deposited by DC magnetron sputtering.
Functional materials letters, 13(5),
Article 2051021. https://doi.org/10.1142/S1793604720510212
Xi,
X., Zeng, F., Cao, H., Cannilla, C., Bisswanger, T.,
de Graaf, S., Pei, Y., Frusteri, F., Stampfer,
C., Palkovits, R., & Heeres, H. J. (2020).
Enhanced C3+alcohol synthesis from syngas using KCoMoSx
catalysts: Effect of the Co-Mo ratio on catalyst
performance. Applied catalysis
b-Environmental, 272, Article 118950. https://doi.org/10.1016/j.apcatb.2020.118950
Sabooni,
S., Ahmadi, M., Galinmoghaddam,
E., Westerwaal, R. J., Boelsma, C., Zoestbergen, E., Song,
G. M., & Pei, Y. T. (2020). Fundamentals of
the adhesion of physical vapor deposited ZnMg-Zn bilayer coatings
to steel substrates. Materials &
design, 190, Article 108560. https://doi.org/10.1016/j.matdes.2020.108560
Ahmadi,
M., Salgin, B., Kooi, B. J., & Pei,
Y. (2020). Genesis and mechanism of microstructural
scale deformation and cracking in ZnAlMg coatings.
Materials & design, 186, Article
108364. https://doi.org/10.1016/j.matdes.2019.108364
Wu,
Y. M., Liu, J. Q., Cao, H. T., Wu, Z. Y., Wang, Q., Ma, Y. P.,
Jiang, H., Wen, F., & Pei, Y. T. (2020). On
the adhesion and wear resistance of DLC films deposited on nitrile
butadiene rubber: A Ti-C interlayer. Diamond and
Related Materials, 101, Article 107563. https://doi.org/10.1016/j.diamond.2019.107563
Feng,
S., Kamat, A. M., & Pei, Y. (2020).
Prediction of thermal stresses and shape deviation of
selective laser melted overhanging region with a coupled CFD-FEM
model. 1. Abstract from 14th World Congress in
Computational Mechanics, Paris, France.
Sengupta,
D., Chen, S.-H., Michael, A., Kwok, C. Y., Lim, S.,
Pei, Y. T., & Kottapalli, A. G. P. (2020).
Single and bundled carbon nanofibers as ultralightweight and
flexible piezoresistive sensors. npj Flexible
Electronics, 4(1), Article 9. https://doi.org/10.1038/s41528-020-0072-2
Yan,
F., Spyrou, K., Thomou, E., Kumar,
S., Cao, H., Stuart, M. C. A., Pei,
Y., Gournis, D., & Rudolf, P. (2020).
Smectite clay pillared with copper complexed polyhedral
oligosilsesquioxane for adsorption of chloridazon and its
metabolites. Environmental Science:
Nano, 7(2), 424-436. https://doi.org/10.1039/c9en00974d
Sabooni,
S., Galinmoghaddam, E., Turkin, A., Lu,
E., Westerwaal, R. J., Boelsma, C., Zoestbergen, E.,
& Pei, Y. T. (2020). Tailoring vapor-deposited
ZnMg-Zn bilayer coating for steels by diffusion-driven phase
transformation. Journal of Alloys and
Compounds, 836, Article 155448. https://doi.org/10.1016/j.jallcom.2020.155448
Ouyang,
J., Wang, Y., Pei, Y., Dong, H., & Matthews, D.
(2020). The 25th International Federation for Heat Treatment
and Surface Engineering Congress (IFHTSE '18).
Surface & Coatings Technology,
382, Article 125165. https://doi.org/10.1016/j.surfcoat.2019.125165
Sabooni,
S., Galinmoghaddam, E., Turkin, A. A.,
& Pei, Y. T. (2020). The effect of annealing
treatment on the adhesion performance of a PVD coated ZnMg-Zn
steel. Abstract from 4th European Conference on
Materials, Mechatronics and Manufacturing (2020), Athens,
Greece.
2019
Solhjoo,
S., Halbertsma, P. J., Veldhuis, M., Toljaga,
R., Pei, Y., & Vakis, A. I.
(2020). Effects of loading conditions on free surface
roughening of AISI 420 martensitic stainless steel.
Journal of Materials Processing Technology,
275, Article 116311. https://doi.org/10.1016/j.jmatprotec.2019.116311
Heidarzadeh,
A., Chabok, A., Mousavian, R. T., & Pei,
Y. (2020). High-resolution EBSD characterisation of
friction stir welded nickel-copper alloy: Effect of the initial
microstructure on microstructural evolution and mechanical
properties. Philosophical Magazine,
100(3), 337-352. https://doi.org/10.1080/14786435.2019.1680889
Cao,
H., Wen, F., De Hosson, J. T. M., & Pei,
Y. (2020). On the Self-Repair of WS2/a-C
Tribocoating. Advanced Materials
Interfaces, 7(1), Article 1900938. https://doi.org/10.1002/admi.201900938
Lu,
L., Pei, F., Abeln, T., & Pei, Y. T.
(2020). Tailoring three-dimensional interconnected nanoporous
graphene micro/nano-foams for lithium-sulfur batteries.
Carbon, 157, 437-447. https://doi.org/10.1016/j.carbon.2019.10.072
Lu,
L., & Pei, Y. (2019). A method for producing a metallic structure and a
metallic structure obtainable by the method. (Patent No.
WO2019020494). https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=WO&NR=2019020494A1&KC=A1&FT=D&ND=3&date=20190131&DB=&locale=en_EP
Kamat,
A. M., & Pei, Y. T. (2019). An
analytical method to predict and compensate for residual
stress-induced deformation in overhanging regions of internal
channels fabricated using powder bed fusion.
Additive Manufacturing, 29, Article
100796. https://doi.org/10.1016/j.addma.2019.100796
Heidarzadeh,
A., Chabok, A., Klemm, V., & Pei, Y.
(2019). A Novel Approach to Structure Modification of Brasses
by Combination of Non-equilibrium Heat Treatment and Friction Stir
Processing. Metallurgical and Materials
Transactions A-Physical Metallurgy and Materials
Science, 50A(5), 2391-2398. https://doi.org/10.1007/s11661-019-05175-3
Kamat,
A. M., Pei, Y., & Kottapalli, A. G.
P. (2019). Bioinspired Cilia Sensors with Graphene
Sensing Elements Fabricated Using 3D Printing and Casting.
Nanomaterials, 9(7), Article 954. https://doi.org/10.3390/nano9070954
Ahangaran,
F., Hayaty, M., Navarchian, A. H., Pei, Y.,
& Picchioni, F. (2019). Development of
self-healing epoxy composites via incorporation of
microencapsulated epoxy and mercaptan in poly(methyl methacrylate)
shell. Polymer testing, 73,
395-403. https://doi.org/10.1016/j.polymertesting.2018.11.041
Ouyang,
J., Pei, Y., Wang, Y., Dong, H., Rudolph, H., &
Shao, Z. (2019). Editorial. Applied Surface
Science, 498, Article 143746. https://doi.org/10.1016/j.apsusc.2019.143746
Sabooni,
S., Galinmoghaddam, E., Westerwaal, R. J.,
Zoestbergen, E., & Pei, Y. T. (2019). Effect
of Mg concentration & layer thickness on the adhesion of
ZnMg-Zn bi-layered PVD coatings. In international
conference Materials Characterization
Sabooni,
S., Galinmoghaddam, E., Westerwaal, R. J.,
Zoestbergen, E., & Pei, Y. (2019). Effect of
Mg concentration and layer thickness on the adhesion of ZnMg-Zn
bilayer PVD coatings: Invited. In S. Hernández, &
J. De Hosson (Eds.), WIT Transactions on Engineering
Sciences (2019 ed., Vol. Materials and Contact
Characterisation IX, pp. 63-71). WIT Press.
Heidarzadeh,
A., Saeid, T., Klemm, V., Chabok, A., & Pei,
Y. (2019). Effect of stacking fault energy on the
restoration mechanisms and mechanical properties of friction stir
welded copper alloys. Materials &
design, 162, 185-197. https://doi.org/10.1016/j.matdes.2018.11.050
Sabooni,
S., Galinmoghaddam, E., Westerwaal, R. J.,
Zoestbergen, E., & Pei, Y. (2019). Effects
of magnesium concentration and layer thickness on the adhesion of
physical vapor deposited ZnMg-Zn bi-layer coatings. In S.
Hernández, J. De Hosson, D. O. Northwood, & R. Vilar
(Eds.), Materials and Contact Characterisation IX (pp.
63-71). (WIT Transactions on Engineering Sciences; Vol. 124). WIT
Press. https://doi.org/10.2495/MC190061
Heidarzadeh,
A., Chabok, A., & Pei, Y. (2019).
Friction stir welding of Monel alloy at different heat input
conditions: Microstructural mechanisms and tensile behavior.
Materials Letters, 245, 94-97. https://doi.org/10.1016/j.matlet.2019.02.108
Mokabber,
T., Zhou, Q., Vakis, A. I., van Rijn,
P., & Pei, Y. T. (2019). Mechanical
and biological properties of electrodeposited calcium phosphate
coatings. Materials science & engineering
c-Biomimetic and supramolecular systems, 100,
475-484. https://doi.org/10.1016/j.msec.2019.03.020
2018
Liu,
J., Wu, Z., Cao, H., Wen, F., & Pei, Y. T. (2019).
Effect of bias voltage on the tribological and sealing
properties of rubber seals modified by DLC films.
Surface and Coatings Technology,
360, 391-399. https://doi.org/10.1016/j.surfcoat.2018.12.100
Liu,
J. Q., Li, L. J., Wei, B., Wen, F., Cao, H., & Pei, Y.
T. (2019). Effect of sputtering pressure on the
surface topography, structure, wettability and tribological
performance of DLC films coated on rubber by magnetron
sputtering. Surface and Coatings
Technology, 365, 33-40. https://doi.org/10.1016/j.surfcoat.2018.05.012
Wei,
B., Xue, J. L., Cao, H., LI, H. G., Wen, F., & Pei, Y.
T. (2019). Effects of annealing on the composition,
structure and photocatalytic properties of C-doped titania films
deposited by reactive magnetron sputtering using CO2 as carbon
source. Surface Review and Letters,
26(8), Article 1950036. https://doi.org/10.1142/S0218625X19500367
2020
Groen,
M., Solhjoo, S., Voncken, R., Post,
J., & Vakis, A. (2020). FlexMM: A
standard method for material descriptions in FEM.
Advances in Engineering Software,
148, Article 102876. https://doi.org/10.1016/j.advengsoft.2020.102876
2018
Groen,
M., Zijlstra, G., San-Martin, D., Post, J.,
& De Hosson, J. T. M. (2018). Product shape change
by internal stresses. Materials &
design, 157, 492-500. https://doi.org/10.1016/j.matdes.2018.08.013
2017
Celada-Casero,
C., Kooiker, H., Groen, M., Post, J., &
San-Martin, D. (2017). In-Situ Investigation of
Strain-Induced Martensitic Transformation Kinetics in an Austenitic
Stainless Steel by Inductive Measurements.
JOM, 7(7), Article 271. https://doi.org/10.3390/met7070271
2016
Zijlstra,
G., Groen, M., Post, J., Ocelik,
V., & de Hosson, J. T. M. (2016). On
the role of the residual stress state in product
manufacturing. Materials & design,
105, 375-380. https://doi.org/10.1016/j.matdes.2016.05.085
2012
Post,
J., & Geijselaers, H. J. M. (2012). Effect of
Deformation History on the precipitation behaviour of Metastable
Austenitic Stainless Steels. In 15th ESAFORM CONFERENCE
2012 (pp. 851-856) https://doi.org/10.4028/www.scientific.net/KEM.504-506.851
2008
Post,
J., Datta, K., & Beyer, J. (2008). A macroscopic
constitutive model for a metastable austenitic stainless
steel. Materials science and engineering
a-Structural materials properties microstructure and
processing, 485(1-2), 290-298. https://doi.org/10.1016/j.msea.2007.07.084
Post,
J., Nolles, H., Datta, K., & Geijselaers, H. J. M.
(2008). Experimental determination of the constitutive
behaviour of a metastable austenitic stainless steel.
Materials science and engineering a-Structural materials
properties microstructure and processing,
498(1-2), 179-190. https://doi.org/10.1016/j.msea.2008.07.051
2007
Post,
J., Geijselaers, H. J. M., & Datta, K. (2007).
Finite Element calculation of the Local Variation in the
driving force for austenite to martensite transformation. In
ESAFORM 2007 (pp. 559-567). ( Materials science and
technology : MST ; a publ. of the Institute of Metals; Vol. 26, No.
5). Inst.
Datta,
K., Geijselaers, H. J. M., Post, J., Beyer, J., &
Huetink, H. (2007). Modelling the Material Behaviour of
Metastable Stainless Steels. In CP908 NUMIFORM 2007
American Institute of Physics.
2005
van
Amstel, T., Groen, M., Post, J., & Huentik, H.
(2005). Optimizing the Post Sandvik Nanoflex material model
using inverse optimization and the finite element method. In
Proceedings of the 8th ESAFORM Conference on Material
Forming (pp. 161-170)
2004
Post,
J. (2004). A DACE study on a three stage metal forming
process made of Sandvik Nanoflex. In NUMIFORM 2004
(pp. 475-480)
Post,
J., & Datta, K. (2004). Constitutive behaviour of
the metastable stainless steel: Sandvik Nanoflex. In
NUMIFORM 2004 (pp. 1670-1676)
Post,
J. (2004). Constitutive Modelling of Metastable
Steels. In The seventh ESAFORM conference on Material
Forming
Post,
J. (2004). FE calculations on a three stage metal
forming process of Sandvik Nanoflex. In NUMIFORM
2004 (pp. 469-474)
2003
Post,
J., & Geijselaers, H. J. M. (2003). Constitutive
Modelling of Metastable Steel. In NIMR Congress
2003
Post,
J., Geijselaers, H. J. M., & Beyer, J. (2003).
Constitutive Modelling of Sandvik 1RK91. In
Proceedings of COMPLAS 2003 : VII International Conference on
Computational Plasticity
2002
Post,
J., & Beyer, J. (2002). A physically based model
for the isothermal martensitic transformation in Sandvik steel
1RK91. In ICOMAT 2002 (pp. 437-440)
Post,
J., & Geijselaers, H. J. M. (2002). FEM
simulations of a multi-stage forming process on Sandvik steel 1RK91
describing the stress-assisted and the strain induced martensite
transformation. In ICOMAT 2002 (pp. 417-420)
Post,
J., & Geijselaers, H. J. M. (2002). Finite element
modelling of concurrent deformation and transformation in
metastable steels. In ABAQUS Users 2002
Post,
J., & Beyer, J. (2002). Inductive measurements of
the stress-assisted and strain induced martensite transformations
of Sandvik steel 1RK91 before, during and after metal
forming. In ICOMAT 2002 (pp. 425-428)
2001
Post,
J., & Geijselaers, H. J. M. (2001). Deformation of
and Transformation in Metastable Steels. In NIMR
Congress 2001
Post,
J., & Geijselaers, H. J. M. (2001). Verification
tool for 2D multi-stage metal forming processes involving small
parts made of stainless steel. In Shemet 2001 (pp.
475-484)
1996
Post,
J. (1996). FEM simulations on Stamping including
ductile fracture. In Shemet 1996
Post,
J. (1996). Strengthening of Micro-Alloyed Sheet steel
by Oxinitrocaburizing. In Heat treatment of metals
(pp. 53-56)
1995
Post,
J. (1995). Strengthening of micro-alloyed sheet steel
by oxinitrocarburizing. In Second international
Conference on Carburizing and Nitriding with Atmospheres (pp.
6-8). ASM Press.
| Last modified: | 25 June 2024 1.32 p.m. |