Kamperman, prof. dr. Marleen

decoratieve afbeelding — Marleen Kamperman Foto: Reyer Boxem

Marleen Kamperman studeerde Scheikunde aan de RUG en promoveerde in 2008 aan Cornell University in Ithaca, New York. Sinds 2018 is ze hoogleraar Polymer Science aan de RUG. Kamperman richt zich hier op het maken van nieuwe materialen, zoals de lange, organische moleculen die polymeren zijn vaak worden genoemd.

Kamperman bestudeert zachtere materialen die geschikt zijn voor onder meer biomedische toepassingen. Haar focus ligt nu op lijmen die goed hechten op natte oppervlakken. Een gekko lijkt bijvoorbeeld superlijm op zijn poten te hebben: hij kan zijn poten heel vaak lostrekken en weer vastzetten, zonder dat de lijm zijn werking verliest. Ook mosselen hebben bijzondere lijm, die werkt onder water. Kamperman is hierdoor gefascineerd en probeert zulke bijzondere lijmen na te maken. Die kunnen bijvoorbeeld in het menselijk lichaam worden gebruikt, om wonden te lijmen in plaats van te hechten.

In 2019 en 2020 schreef Kamperman een serie columns over wetenschap voor De Volkskrant.

Research minute

Waarom plakt een spin niet in z'n eigen web?

In 2019 ontving Kamperman een Europese ERC Consolidator Grant. Daarmee wil ze nieuwe materialen ontwikkelen door gebruik te maken van milieuvriendelijke processen. “In de natuur maken allerlei organismen fantastische materialen, zoals spinrag en de draden van de fluweelworm, zonder daarbij gebruik te maken van schadelijke oplosmiddelen. Veel van die materialen bestaan uit eiwitten en voor ze hun uiteindelijke eigenschappen krijgen, zitten ze in vloeibare vorm in het organisme. De omzetting van de vloeistof naar het uiteindelijke materiaal is een heel interessant proces, dat ik wil nabootsen in het laboratorium.”

In 2023 ontving Kamperman een Vici-beurs voor haar onderzoek naar (bio)polymeer materialen.

Eerder in het nieuws

Contact en meer informatie

Zie de profielpagina

Publicaties

2024

van Westerveld, L., Pelras, T., Hofman, A. H., Loos, K., Kamperman, M., & Es Sayed, J. (2024). Effect of Polyelectrolyte Charge Density on the Linear Viscoelastic Behavior and Processing of Complex Coacervate Adhesives. Macromolecules, 57(2), 652-663. https://doi.org/10.1021/acs.macromol.3c02352

Rampratap, P., Lasorsa, A., Arunachalam, A., Kamperman, M., Walvoort, M. T. C., & van der Wel, P. C. A. (2024). Resolving Atomic-Level Dynamics and Interactions of High-Molecular-Weight Hyaluronic Acid by Multidimensional Solid-State NMR. ACS Applied Materials & Interfaces, 16(33), 43317–43328. https://doi.org/10.1021/acsami.4c08428

Kwant, A., Es Sayed, J., Kamperman, M., Burgess, J., Slebos, D. J., & Pouwels, S. D. (2024). Sticky Science: Using Complex Coacervate Adhesives for Biomedical Applications. Advanced healthcare materials, Article 2402340. Advance online publication. https://doi.org/10.1002/adhm.202402340

Es Sayed, J., Mukherjee, A., El Aani, S., Vengallur, N., Koch, M., Giuntoli, A., & Kamperman, M. (2024). Structure-Property Relationships of Granular Hybrid Hydrogels Formed through Polyelectrolyte Complexation. Macromolecules, 57(7), 3190-3201. https://doi.org/10.1021/acs.macromol.3c02335

Khoonkari, M., Liang, D., Kamperman, M., van Rijn, P., & Kruyt, F. A. E. (2024). The unfolded protein response sensor PERK mediates mechanical stress-induced maturation of focal adhesion complexes in glioblastoma cells. FEBS Letters. Advance online publication. https://doi.org/10.1002/1873-3468.14996

2023

Khoonkari, M., Sayed, J. E., Oggioni, M., Amirsadeghi, A., Parisi, D., Kruyt, F., Rijn, P. V., Włodarczyk‐Biegun, M. K., & Kamperman, M. (2023). Bioinspired Processing: Complex Coacervates as Versatile Inks for 3D Bioprinting. Advanced materials, 35(28), Article 2210769. https://doi.org/10.1002/adma.202210769

Sun, J., Monreal Santiago, G., Yan, F., Zhou, W., Rudolf, P., Portale, G., & Kamperman, M. (2023). Bioinspired Processing of Keratin into Upcycled Fibers through pH-Induced Coacervation. ACS Sustainable Chemistry and Engineering, 11(5), 1985-1994. https://doi.org/10.1021/acssuschemeng.2c06865

Es Sayed, J., Caïto, C., Arunachalam, A., Amirsadeghi, A., van Westerveld, L., Maret, D., Mohamed Yunus, R. A., Calicchia, E., Dittberner, O., Portale, G., Parisi, D., & Kamperman, M. (2023). Effect of Dynamically Arrested Domains on the Phase Behavior, Linear Viscoelasticity and Microstructure of Hyaluronic Acid - Chitosan Complex Coacervates. Macromolecules, 56(15), 5891–5904. https://doi.org/10.1021/acs.macromol.3c00269

Mukherjee, A., Dianatdar, A., Gładysz, M. Z., Hemmatpour, H., Hendriksen, M., Rudolf, P., Włodarczyk-Biegun, M. K., Kamperman, M., Prakash Kottapalli, A. G., & Bose, R. K. (2023). Electrically Conductive and Highly Stretchable Piezoresistive Polymer Nanocomposites via Oxidative Chemical Vapor Deposition. ACS Applied Materials and Interfaces, 15, 31899−31916. https://doi.org/10.1021/acsami.3c06015

van Westerveld, L., Es Sayed, J., de Graaf, M., Hofman, A. H., Kamperman, M., & Parisi, D. (2023). Hydrophobically modified complex coacervates for designing aqueous pressure-sensitive adhesives. Soft Matter, 19(45), 8832-8848. https://doi.org/10.1039/d3sm01114c

Wu, X., Vedelaar, T., Li, R., Schirhagl, R., Kamperman, M., & Włodarczyk-Biegun, M. K. (2023). Melt electrowritten scaffolds containing fluorescent nanodiamonds for improved mechanical properties and degradation monitoring. Bioprinting, 32, Article e00288. https://doi.org/10.1016/j.bprint.2023.e00288

Pelras, T., Eisenga, A., Érsek, G., Altomare, A., Portale, G., Kamperman, M., & Loos, K. (2023). One-Pot Synthesis of Strong Anionic/Charge-Neutral Amphiphilic Block Copolymers. Acs Macro Letters, 12, 1071-1078. https://doi.org/10.1021/acsmacrolett.3c00355

Maan, A., Graafsma, C., Hofman, A., Pelras, T., de Vos, W. M., & Kamperman, M. (2023). Scalable Fabrication of Reversible Antifouling Block Copolymer Coatings via Adsorption Strategies. ACS Applied Materials & Interfaces, 15(15), 19682-19694. https://doi.org/10.1021/acsami.3c01060

Maan, A., Hofman, A., Pelras, T., Ruhof, I., Kamperman, M., & de Vos, W. M. (2023). Toward Effective and Adsorption-Based Antifouling Zipper Brushes: Effect of pH, Salt, and Polymer Design. ACS Applied Polymer Materials, 5(10), 7968–7981. https://doi.org/10.1021/acsapm.3c01217

2022

Kembaren, R., Westphal, A. H., Kamperman, M., Kleijn, J. M., & Borst, J. W. (2022). Charged Polypeptide Tail Boosts the Salt Resistance of Enzyme-Containing Complex Coacervate Micelles. Biomacromolecules, 23(3), 1195-1204. https://doi.org/10.1021/acs.biomac.1c01466

Kembaren, R., Kleijn, J. M., Borst, J. W., Kamperman, M., & Hofman, A. H. (2022). Enhanced stability of complex coacervate core micelles following different core-crosslinking strategies. Soft Matter, 18(15), 3052-3062. https://doi.org/10.1039/d2sm00088a

Zielinski, P., Kamperman, M., & Wlodarczyk-Biegun, M. (2022). MELT ELECTROWRITTEN SCAFFOLDS FOR SOFT-TO-HARD TISSUE INTERFACES: MECHANICAL AND BIOLOGICAL EVALUATION. Tissue Engineering. Part A, 28(1), S490. https://doi.org/10.1089/ten.tea.2022.29025.abstracts

Es Sayed, J., Khoonkari, M., Oggioni, M., Perrin, P., Sanson, N., Kamperman, M., & Włodarczyk-Biegun, M. K. (2022). Multi-Responsive Jammed Micro-Gels Ink: Toward Control over the Resolution and the Stability of 3D Printed Scaffolds. Advanced Functional Materials, 32(48), Article 2207816. https://doi.org/10.1002/adfm.202207816

Khoonkari, M., Liang, D., Kamperman, M., Kruyt, F. A. E., & van Rijn, P. (2022). Physics of Brain Cancer: Multiscale Alterations of Glioblastoma Cells under Extracellular Matrix Stiffening. Pharmaceutics, 14(5), Article 1031. https://doi.org/10.3390/pharmaceutics14051031

Hofman, A. H., Pedone, M., & Kamperman, M. (2022). Protected Poly(3-sulfopropyl methacrylate) Copolymers: Synthesis, Stability, and Orthogonal Deprotection. ACS Polymers Au, 2(3), 169-180. https://doi.org/10.1021/acspolymersau.1c00044

Es Sayed, J., Brummer, H., Stuart, M. C. A., Sanson, N., Perrin, P., & Kamperman, M. (2022). Responsive Pickering Emulsions Stabilized by Frozen Complex Coacervate Core Micelles. Acs Macro Letters, 11(1), 20-25. https://doi.org/10.1021/acsmacrolett.1c00647

Pelras, T., Hofman, A. H., Germain, L. M. H., Maan, A. M. C., Loos, K., & Kamperman, M. (2022). Strong Anionic/Charge-Neutral Block Copolymers from Cu(0)-Mediated Reversible Deactivation Radical Polymerization. Macromolecules, 55(19), 8795–8807. https://doi.org/10.1021/acs.macromol.2c01487

Khoonkari, M., Liang, D., Lima, M. T., van der Land, T., Liang, Y., Sun, J., Dolga, A., Kamperman, M., van Rijn, P., & Kruyt, F. A. E. (2022). The Unfolded Protein Response Sensor PERK Mediates Stiffness-Dependent Adaptation in Glioblastoma Cells. International Journal of Molecular Sciences, 23(12), Article 6520. https://doi.org/10.3390/ijms23126520

Gladysz, M., Kamperman, M., Nagelkerke, A., & Wlodarczyk-Biegun, M. (2022). THIN MELT-ELECTROWRITTEN SCAFFOLDS AS A NOVEL ALTERNATIVE FOR POROUS INSERTS IN BLOOD-BRAIN BARRIER MODELS IN VITRO. S486.

Sayed, J. E., & Kamperman, M. (2022). Ultra-sounding out a technique that sticks. Science, 377(6607), 707-708. https://doi.org/10.1126/science.abq7021

Sun, J., Monreal Santiago, G., Zhou, W., Portale, G., & Kamperman, M. (2022). Water-Processable, Stretchable, and Ion-Conducting Coacervate Fibers from Keratin Associations with Polyelectrolytes. ACS Sustainable Chemistry and Engineering, 10(48), 15968-15977. https://doi.org/10.1021/acssuschemeng.2c05411

2021

Filippov, A. D., Sprakel, J., & Kamperman, M. (2021). Complex coacervation and metal-ligand bonding as synergistic design elements for aqueous viscoelastic materials. Soft Matter, 17(12), 3294-3305. https://doi.org/10.1039/d0sm02236e

Sharma, P., Saggiomo, V., Van Der Doef, V., Kamperman, M., & A. Dijksman, J. (2021). Hooked on mushrooms: Preparation and mechanics of a bioinspired soft probabilistic fastener. Biointerphases, 16(1), Article 011002. https://doi.org/10.1116/6.0000634

2020

Kembaren, R., Fokkink, R., Westphal, A. H., Kamperman, M., Kleijn, J. M., & Borst, J. W. (2020). Balancing Enzyme Encapsulation Efficiency and Stability in Complex Coacervate Core Micelles. Langmuir, 36(29), 8494-8502. https://doi.org/10.1021/acs.langmuir.0c01073

Mintis, D. G., Dompe, M., Kamperman, M., & Mavrantzas, V. G. (2020). Effect of Polymer Concentration on the Structure and Dynamics of Short Poly(N,N-dimethylaminoethyl methacrylate) in Aqueous Solution: A Combined Experimental and Molecular Dynamics Study. Journal of Physical Chemistry B, 124(1), 240-252. https://doi.org/10.1021/acs.jpcb.9b08966

Dompé, M., Vahdati, M., Van Ligten, F., Cedano-Serrano, F. J., Hourdet, D., Creton, C., Zanetti, M., Bracco, P., Van Der Gucht, J., Kodger, T., & Kamperman, M. (2020). Enhancement of the Adhesive Properties by Optimizing the Water Content in PNIPAM-Functionalized Complex Coacervates. ACS Applied Polymer Materials, 2(4), 1722-1730. https://doi.org/10.1021/acsapm.0c00185

Dompé, M., Cedano-Serrano, F. J., Vahdati, M., Hourdet, D., Van der Gucht, J., Kamperman, M., & Kodger, T. E. (2020). Hybrid Complex Coacervate. Polymers, 12(2), Article 320. https://doi.org/10.3390/polym12020320

Maan, A. M. C., Hofman, A. H., de Vos, W. M., & Kamperman, M. (2020). Recent Developments and Practical Feasibility of Polymer-Based Antifouling Coatings. Advanced Functional Materials, 30(32), Article 2000936. https://doi.org/10.1002/adfm.202000936

van Hees, I. A., Hofman, A. H., Dompé, M., der Gucht, J., & Kamperman, M. (2020). Temperature-Responsive Polyelectrolyte Complexes for Bio-Inspired Underwater Adhesives. European Polymer Journal, 141, Article 110034. https://doi.org/10.1016/j.eurpolymj.2020.110034

Dompe, M., Cedano-Serrano, F. J., Vahdati, M., Sidoli, U., Heckert, O., Synytska, A., Hourdet, D., Creton, C., van der Gucht, J., Kodger, T., & Kamperman, M. (2020). Tuning the Interactions in Multiresponsive Complex Coacervate-Based Underwater Adhesives. International Journal of Molecular Sciences, 21(1), Article 100. https://doi.org/10.3390/ijms21010100

2019

Dompe, M., Cedano-Serrano, F. J., Vahdati, M., van Westerveld, L., Hourdet, D., Creton, C., van der Gucht, J., Kodger, T., & Kamperman, M. (2020). Underwater Adhesion of Multiresponsive Complex Coacervates. Advanced Materials Interfaces, 7(4), Article 1901785. https://doi.org/10.1002/admi.201901785

Kamperman, M., Dompe, M., & Filippov, A. D. (2019). Adhesive composition. (Patent No. WO2019172764).

Hofman, A. H., Fokkink, R., & Kamperman, M. (2019). A mild and quantitative route towards well-defined strong anionic/hydrophobic diblock copolymers: Synthesis and aqueous self-assembly. Polymer Chemistry, 10(45), 6109-6115. https://doi.org/10.1039/C9PY01227C

Feat, A., Federle, W., Kamperman, M., & van der Gucht, J. (2019). Coatings preventing insect adhesion: An overview. Progress in Organic Coatings, 134, 349-359. https://doi.org/10.1016/j.porgcoat.2019.05.013

van Assenbergh, P., Fokker, M., Langowski, J., van Esch, J., Kamperman, M., & Dodou, D. (2019). Pull-off and friction forces of micropatterned elastomers on soft substrates: the effects of pattern length scale and stiffness. Beilstein Journal of Nanotechnology, 10, 79-94. https://doi.org/10.3762/bjnano.10.8

Van Hees, I. A., Swinkels, P. J. M., Fokkink, R. G., Velders, A. H., Voets, I. K., Van Der Gucht, J., & Kamperman, M. (2019). Self-assembly of oppositely charged polyelectrolyte block copolymers containing short thermoresponsive blocks. Polymer Chemistry, 10(23), 3127-3134. https://doi.org/10.1039/c9py00250b

Feat, A., Federle, W., Kamperman, M., Murray, M., van der Gucht, J., & Taylor, P. (2019). Slippery paints: Eco-friendly coatings that cause ants to slip. Progress in Organic Coatings, 135, 331-344. https://doi.org/10.1016/j.porgcoat.2019.06.004

Dompe, M., Cedano-Serrano, F. J., Heckert, O., van den Heuvel, N., van der Gucht, J., Tran, Y., Hourdet, D., Creton, C., & Kamperman, M. (2019). Thermoresponsive Complex Coacervate-Based Underwater Adhesive. Advanced materials, 31(21), Article 1808179. https://doi.org/10.1002/adma.201808179

2018

Hofman, A. H., van Hees, I. A., Yang, J., & Kamperman, M. (2018). Bioinspired Underwater Adhesives by Using the Supramolecular Toolbox. Advanced materials, 30(19), Article 1704640. https://doi.org/10.1002/adma.201704640

Yang, J., Włodarczyk-Biegun, M. K., Filippov, A., Akerboom, S., Dompé, M., van Hees, I. A., Mocan, M., & Kamperman, M. (2018). Functional Polymeric Materials Inspired by Geckos, Mussels, and Spider Silk. Macromolecular Chemistry and Physics, 219(16), Article 1800051. https://doi.org/10.1002/macp.201800051

Mocan, M., Kamperman, M., & Leermakers, F. A. M. (2018). Microphase segregation of diblock copolymers studied by the self-consistent field theory of Scheutjens and Fleer. Polymers, 10(1), Article 78. https://doi.org/10.3390/polym10010078

Filippov, A. D., van Hees, I. A., Fokkink, R., Voets, I. K., & Kamperman, M. (2018). Rapid and Quantitative De-tert-butylation for Poly(acrylic acid) Block Copolymers and Influence on Relaxation of Thermoassociated Transient Networks. Macromolecules, 51(20), 8316-8323. https://doi.org/10.1021/acs.macromol.8b01440

Mocan, M., Wahdat, H., van der Kooij, H. M., de Vos, W. M., & Kamperman, M. (2018). Systematic variation of membrane casting parameters to control the structure of thermo-responsive isoporous membranes. Journal of Membrane Science, 548, 502-509. https://doi.org/10.1016/j.memsci.2017.11.047

Langowski, J. K. A., Dodou, D., Kamperman, M., & van Leeuwen, J. L. (2018). Tree frog attachment: Mechanisms, challenges, and perspectives. Frontiers in Zoology, 15(1), Article 32. https://doi.org/10.1186/s12983-018-0273-x

2017

Cetintas, M., De Grooth, J., Hofman, A. H., Van der Kooij, H. M., Loos, K., De Vos, W. M., & Kamperman, M. (2017). Free-standing thermo-responsive nanoporous membranes from high molecular weight PS-PNIPAM block copolymers synthesized via RAFT polymerization. Polymer Chemistry, 8(14), 2235-2243. https://doi.org/10.1039/c7py00023e

Vasilak, L., Tanu Halim, S. M., Das Gupta, H., Yang, J., Kamperman, M., & Turak, A. (2017). Statistical Paradigm for Organic Optoelectronic Devices: Normal Force Testing for Adhesion of Organic Photovoltaics and Organic Light-Emitting Diodes. ACS Applied Materials and Interfaces, 9(15), 13347-13356. https://doi.org/10.1021/acsami.6b15618

2016

Yang, J., Bos, I., Pranger, W., Stuiver, A., Velders, A. H., Cohen Stuart, M. A., & Kamperman, M. (2016). A clear coat from a water soluble precursor: A bioinspired paint concept. Journal of Materials Chemistry A, 4(18), 6868-6877. https://doi.org/10.1039/c5ta09437b

Włodarczyk-Biegun, M. K., Farbod, K., Werten, M. W. T., Slingerland, C. J., De Wolf, F. A., Van Den Beucken, J. J. J. P., Leeuwenburgh, S. C. G., Cohen Stuart, M. A., & Kamperman, M. (2016). Fibrous hydrogels for cell encapsulation: A modular and supramolecular approach. PLoS ONE, 11(5), Article e0155625. https://doi.org/10.1371/journal.pone.0155625

Włodarczyk-Biegun, M. K., Slingerland, C. J., Werten, M. W. T., Van Hees, I. A., De Wolf, F. A., De Vries, R., Stuart, M. A. C., & Kamperman, M. (2016). Heparin as a Bundler in a Self-Assembled Fibrous Network of Functionalized Protein-Based Polymers. Biomacromolecules, 17(6), 2063-2072. https://doi.org/10.1021/acs.biomac.6b00276

Włodarczyk-Biegun, M. K., Werten, M. W. T., Posadowska, U., Storm, I. M., de Wolf, F. A., van den Beucken, J. J. J. P., Leeuwenburgh, S. C. G., Cohen Stuart, M. A., & Kamperman, M. (2016). Nanofibrillar hydrogel scaffolds from recombinant protein-based polymers with integrin- and proteoglycan-binding domains. Journal of Biomedical Materials Research - Part A, 104(12), 3082-3092. https://doi.org/10.1002/jbm.a.35839

Yang, J., Saggiomo, V., Velders, A. H., Stuart, M. A. C., & Kamperman, M. (2016). Reaction pathways in catechol/primary amine mixtures: A window on crosslinking chemistry. PLoS ONE, 11(12), Article e0166490. https://doi.org/10.1371/journal.pone.0166490

Cetintas, M., & Kamperman, M. (2016). Self-assembly of PS-b-PNIPAM-b-PS block copolymer thin films via selective solvent annealing. Polymer, 107, 387-397. https://doi.org/10.1016/j.polymer.2016.08.033

Akerboom, S., Kamperman, M., & Leermakers, F. A. M. (2016). Three-gradient regular solution model for simple liquids wetting complex surface topologies. Beilstein Journal of Nanotechnology, 7(1), 1377-1396. https://doi.org/10.3762/bjnano.7.129

2015

Akerboom, S., Pujari, S. P., Turak, A., & Kamperman, M. (2015). Controlled Fabrication of Polypyrrole Surfaces with Overhang Structures by Colloidal Templating. ACS Applied Materials and Interfaces, 7(30), 16507-16517. https://doi.org/10.1021/acsami.5b03903

Akerboom, S., Appel, J., Labonte, D., Federle, W., Sprakel, J., & Kamperman, M. (2015). Enhanced adhesion of bioinspired nanopatterned elastomers via colloidal surface assembly. Journal of the Royal Society Interface, 12(102), Article 20141061. https://doi.org/10.1098/rsif.2014.1061

Posadowska, U., Parizek, M., Filova, E., Wlodarczyk-Biegun, M., Kamperman, M., Bacakova, L., & Pamula, E. (2015). Injectable nanoparticle-loaded hydrogel system for local delivery of sodium alendronate. International Journal of Pharmaceutics, 485(1-2), 31-40. https://doi.org/10.1016/j.ijpharm.2015.03.003

Yang, J., Keijsers, J., Van Heek, M., Stuiver, A., Cohen Stuart, M. A., & Kamperman, M. (2015). The effect of molecular composition and crosslinking on adhesion of a bio-inspired adhesive. Polymer Chemistry, 6(16), 3121-3130. https://doi.org/10.1039/c4py01790k

2014

Włodarczyk-Biegun, M. K., Werten, M. W. T., De Wolf, F. A., Van Den Beucken, J. J. J. P., Leeuwenburgh, S. C. G., Kamperman, M., & Cohen Stuart, M. A. (2014). Genetically engineered silk-collagen-like copolymer for biomedical applications: Production, characterization and evaluation of cellular response. Acta Biomaterialia, 10(8), 3620-3629. https://doi.org/10.1016/j.actbio.2014.05.006

Yang, J., Cohen Stuart, M. A., & Kamperman, M. (2014). Jack of all trades: Versatile catechol crosslinking mechanisms. Chemical Society Reviews, 43(24), 8271-8298. https://doi.org/10.1039/c4cs00185k

2013

Paretkar, D., Kamperman, M., Martina, D., Zhao, J., Creton, C., Lindner, A., Jagota, A., McMeeking, R., & Arzt, E. (2013). Preload-responsive adhesion: Effects of aspect ratio, tip shape and alignment. Journal of the Royal Society Interface, 10(83), Article 20130171. https://doi.org/10.1098/rsif.2013.0171

Lunkenbein, T., Kamperman, M., Schieder, M., With, S., Li, Z., Sai, H., Förster, S., Wiesner, U., & Breu, J. (2013). Towards mesoporous Keggin-type polyoxometalates-systematic study on organic template removal. Journal of Materials Chemistry A, 1(20), 6238-6248. https://doi.org/10.1039/c3ta10333a

2012

Warren, S. C., Perkins, M. R., Adams, A. M., Kamperman, M., Burns, A. A., Arora, H., Herz, E., Suteewong, T., Sai, H., Li, Z., Werner, J., Song, J., Werner-Zwanziger, U., Zwanziger, J. W., Grätzel, M., Disalvo, F. J., & Wiesner, U. (2012). A silica sol-gel design strategy for nanostructured metallic materials. Nature Materials, 11(5), 460-467. https://doi.org/10.1038/nmat3274

Lunkenbein, T., Kamperman, M., Li, Z., Bojer, C., Drechsler, M., Förster, S., Wiesner, U., Müller, A. H. E., & Breu, J. (2012). Direct synthesis of inverse hexagonally ordered diblock copolymer/polyoxometalate nanocomposite films. Journal of the American Chemical Society, 134(30), 12685-12692. https://doi.org/10.1021/ja304073t

Cañas, N., Kamperman, M., Völker, B., Kroner, E., McMeeking, R. M., & Arzt, E. (2012). Effect of nano- and micro-roughness on adhesion of bioinspired micropatterned surfaces. Acta Biomaterialia, 8(1), 282-288. https://doi.org/10.1016/j.actbio.2011.08.028

Kamperman, M., & Synytska, A. (2012). Switchable adhesion by chemical functionality and topography. Journal of Materials Chemistry, 22(37), 19390-19401. https://doi.org/10.1039/c2jm31747h

2011

Kaiser, J. S., Kamperman, M., de Souza, E. J., Schick, B., & Arzt, E. (2011). Adhesion of biocompatible and biodegradable micropatterned surfaces. International journal of artificial organs, 34(2), 180-184. https://doi.org/10.5301/IJAO.2011.6393

Kamperman, M., Arzt, E., & Del Campo, A. (2011). Bioinspired Patterned Adhesives. In A. del Campo, & E. Arzt (Eds.), Generating Micro- and Nanopatterns on Polymeric Materials (pp. 319-335). Wiley. https://doi.org/10.1002/9783527633449.ch15

Paretkar, D., Kamperman, M., Schneider, A. S., Martina, D., Creton, C., & Arzt, E. (2011). Bioinspired pressure actuated adhesive system. Materials Science and Engineering C, 31(6), 1152-1159. https://doi.org/10.1016/j.msec.2010.10.004

Lee, J., Jung, Y. S., Warren, S. C., Kamperman, M., Oh, S. M., Disalvo, F. J., & Wiesner, U. (2011). Direct access to mesoporous crystalline TiO₂/carbon composites with large and uniform pores for use as anode materials in lithium ion batteries. Macromolecular Chemistry and Physics, 212(4), 383-390. https://doi.org/10.1002/macp.201000687

Castellanos, G., Arzt, E., & Kamperman, M. (2011). Effect of viscoelasticity on adhesion of bioinspired micropatterned epoxy surfaces. Langmuir, 27(12), 7752-7759. https://doi.org/10.1021/la2009336

Kroner, E., Kamperman, M., & Arzt, E. (2011). Gecko-inspired adhesives from science to industrial application. Adhaesion Kleben und Dichten, 3, 40-44.

Li, R., Cornaby, S., Kamperman, M., & Smilgies, D. M. (2011). Nanocomposite characterization on multiple length scales using μSAXS. Journal of Synchrotron Radiation, 18(5), 697-701. https://doi.org/10.1107/S0909049511024873

2010

Kamperman, M., & Wiesner, U. (2010). Bioinspired Block Copolymer-Based Hybrid Materials. In K. Rurack, & R. Martínez-Máñez (Eds.), The Supramolecular Chemistry of Organic-Inorganic Hybrid Materials (pp. 599-636). John Wiley and Sons Ltd. https://doi.org/10.1002/9780470552704.ch21

Arora, H., Li, Z., Sai, H., Kamperman, M., Warren, S. C., & Wiesner, U. (2010). Block copolymer directed nanoporous metal thin films. Macromolecular Rapid Communications, 31(22), 1960-1964. https://doi.org/10.1002/marc.201000275

Kamperman, M., Kroner, E., Del Campo, A., McMeeking, R. M., & Arzt, E. (2010). Functional adhesive surfaces with "Gecko" effect: The concept of contact splitting. Advanced Engineering Materials, 12(5), 335-348. https://doi.org/10.1002/adem.201000104

Kamperman, M., Korley, L. T. J., Yau, B., Johansen, K. M., Joo, Y. L., & Wiesner, U. (2010). Nanomanufacturing of continuous composite nanofibers with confinement-induced morphologies. Polymer Chemistry, 1(7), 1001-1004. https://doi.org/10.1039/c0py00146e

2009

Crossland, E. J. W., Kamperman, M., Nedelcu, M., Ducati, C., Wiesner, U., Smilgies, D. .-M., Toombes, G. E. S., Hillmyer, M. A., Ludwigs, S., Steiner, U., & Snaith, H. J. (2009). A Bicontinuous Double Gyroid Hybrid Solar Cell. Nano Letters, 9(8), 2807-2812. https://doi.org/10.1021/nl803174p

Kamperman, M., Burns, A., Weissgraeber, R., Van Vegten, N., Warren, S. C., Gruner, S. M., Baiker, A., & Wiesner, U. (2009). Integrating structure control over multiple length scales in porous high temperature ceramics with functional platinum nanoparticles. Nano Letters, 9(7), 2756-2762. https://doi.org/10.1021/nl901293p

De Souza, E. J., Kamperman, M., Castellanos, G., Kroner, E., Armbruester, V., Romann, M. S., Schick, B., & Arzt, E. (2009). In vitro adhesion measurements between skin and micropatterned poly(dimethylsiloxane) surfaces. In Proceedings of the 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society: Engineering the Future of Biomedicine, EMBC 2009 (pp. 6018-6021). Article 5334532 (Proceedings of the 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society: Engineering the Future of Biomedicine, EMBC 2009). IEEE Computer Society. https://doi.org/10.1109/IEMBS.2009.5334532

Li, Z., Sai, H., Warren, S. C., Kamperman, M., Arora, H., Gruner, S. M., & Wiesner, U. (2009). Metal nanoparticle - Block copolymer composite assembly and disassembly. Chemistry of Materials, 21(23), 5578-5584. https://doi.org/10.1021/cm9020673

Garcia, B. C., Kamperman, M., Ulrich, R., Jain, A., Gruner, S. M., & Wiesner, U. (2009). Morphology diagram of a diblock copolymer - Aluminosilicate nanoparticle system. Chemistry of Materials, 21(22), 5397-5405. https://doi.org/10.1021/cm901885c

2008

Lee, J., Christopher Orilall, M., Warren, S. C., Kamperman, M., Disalvo, F. J., & Wiesner, U. (2008). Direct access to thermally stable and highly crystalline mesoporous transition-metal oxides with uniform pores. Nature Materials, 7(3), 222-228. https://doi.org/10.1038/nmat2111

Kamperman, M., & Wiesner, U. (2008). Mesostructured Polymer-Inorganic Hybrid Materials from Blocked Macromolecular Architectures and Nanoparticles. In M. Lazzari, & G. Liu (Eds.), Block Copolymers in Nanoscience (pp. 309-335). John Wiley and Sons Ltd. https://doi.org/10.1002/9783527610570.ch14

Kamperman, M., Fierke, M. A., Garcia, C. B. W., & Wiesner, U. (2008). Morphology control in block copolymer/polymer derived ceramic precursor nanocomposites. Macromolecules, 41(22), 8745-8752. https://doi.org/10.1021/ma801458w

Warren, S. C., Messina, L. C., Slaughter, L. S., Kamperman, M., Zhou, Q., Gruner, S. M., DiSalvo, F. J., & Wiesner, U. (2008). Ordered mesoporous materials from metal nanoparticle-block copolymer self-assembly. Science, 320(5884), 1748-1752. https://doi.org/10.1126/science.1159950

Toombes, G. E. S., Mahajan, S., Weyland, M., Jain, A., Du, P., Kamperman, M., Gruner, S. M., Muller, D. A., & Wiesner, U. (2008). Self-assembly of four-layer woodpile structure from zigzag ABC copolymer/aluminosilicate concertinas. Macromolecules, 41(3), 852-859. https://doi.org/10.1021/ma071004s

2007

Kamperman, M., Du, P., Scarlat, R. O., Herz, E., Werner-Zwanziger, U., Graf, R., Zwanziger, J. W., Spiess, H. W., & Wiesner, U. (2007). Composition and morphology control in ordered mesostructured high-temperature ceramics from block copolymer mesophases. Macromolecular Chemistry and Physics, 208(19-20), 2096-2108. https://doi.org/10.1002/macp.200700194

Verploegen, E., Dworken, B. T., Faught, M., Kamperman, M., Zhang, Y., & Wiesner, U. (2007). Tuning mechanical properties of block copolymer/aluminosilicate hybrid materials. Macromolecular Rapid Communications, 28(5), 572-578. https://doi.org/10.1002/marc.200600705

2006

Kalra, V., Kakad, P. A., Mendez, S., Ivannikov, T., Kamperman, M., & Joo, Y. L. (2006). Self-assembled structures in electrospun poly(styrene-block-isoprene) fibers. Macromolecules, 39(16), 5453-5457. https://doi.org/10.1021/ma052643a

2004

Kamperman, M., Garcia, C. B. W., Du, P., Ow, H., & Wiesner, U. (2004). Ordered mesoporous ceramics stable up to 1500 °C from diblock copolymer mesophases. Journal of the American Chemical Society, 126(45), 14708-14709. https://doi.org/10.1021/ja046795h

Laatst gewijzigd:

23 december 2024 15:13

View this page in: English